• [ CXUS7701H/L ]"

Ordering

目录eyw嘉泰姆

1.产品概述                       2.产品特点eyw嘉泰姆
3.应用范围                       4.产品封装图eyw嘉泰姆
5.电路原理图                    6.产品PDF文档 eyw嘉泰姆
7.功能概述                        8.相关产品eyw嘉泰姆

一,产品概述(General Description)     eyw嘉泰姆

     The CXUS7701H/L SmartSwitch is a current limited P-channel MOSFET power eyw嘉泰姆

switch designed for high-side load switching applications. This switch operates eyw嘉泰姆

with inputs ranging from 2.4V to 5.5V, making it ideal for both 3V and 5V systems. An integrated current-limiting circuit protects the input supply against large currents eyw嘉泰姆

which may cause the supply to fall out of regulation. The CXUS7701H/L is also eyw嘉泰姆

protected from thermal overload which limits power dissipation and junction eyw嘉泰姆

temperatures. It can be used to control loads that require up to 1A. Current limit eyw嘉泰姆

threshold is programmed with a resistor from SET to ground. The quiescent supplyeyw嘉泰姆

 current is typically a low 9μA. In shutdown mode, the supply current decreaseseyw嘉泰姆

 to less than 1μA.eyw嘉泰姆

      The CXUS7701H/L is available in a Pb-free 5-pin SOT23 or 8-pin SC70JW packageeyw嘉泰姆

 and is specified over the -40°C to +85°C temperature range.eyw嘉泰姆
二.产品特点(Features)eyw嘉泰姆

Input Voltage Range: 2.4V to 5.5Veyw嘉泰姆

Programmable Over-Current Thresholdeyw嘉泰姆
Fast Transient Response:eyw嘉泰姆
— 400ns Response to Short Circuiteyw嘉泰姆
Low Quiescent Currenteyw嘉泰姆
— 9μA Typicaleyw嘉泰姆
— 1μA Max with Switch Offeyw嘉泰姆
145mΩ Typical RDS(ON)eyw嘉泰姆
Only 2.5V Needed for ON/OFF Controleyw嘉泰姆
Under-Voltage Lockouteyw嘉泰姆
Thermal Shutdowneyw嘉泰姆
4kV ESD Ratingeyw嘉泰姆
5-Pin SOT23 or 8-Pin SC70JW Packageeyw嘉泰姆

Temperature Range: -40°C to +85°Ceyw嘉泰姆
三,应用范围 (Applications)eyw嘉泰姆

 Hot Swap Supplieseyw嘉泰姆
Notebook Computerseyw嘉泰姆
Peripheral Portseyw嘉泰姆
Personal Communication Deviceseyw嘉泰姆
四,产品封装图 (Package)eyw嘉泰姆
eyw嘉泰姆

五,电路原理图eyw嘉泰姆
eyw嘉泰姆
六.产品PDF文档 eyw嘉泰姆

需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！eyw嘉泰姆

 eyw嘉泰姆

七,功能概述eyw嘉泰姆

Operation in Current Limiteyw嘉泰姆

     When a heavy load is applied to the output of the CXUS7701H/L,the load current is limited to the value of ILIM determined by RSET. See Figure 2, "Overload Operation." Since eyw嘉泰姆

the load is demanding more current than ILIM, the voltage at  the output drops. This causes the CXUS7701H/L to dissipate a larger than nor-mal quantity of power, and its die temperature to increase. When the die temperature exceeds an over-temperature limit, the CXUS7701H/L will shut down until is has cooled sufficiently, at which point it will startup again.eyw嘉泰姆

      The CXUS7701H/L will continue to cycle on and off until the load is removed, power is removed, or until a logic  high level is applied to ON. eyw嘉泰姆

Enable Inputeyw嘉泰姆
    In many systems, power planes are controlled by integrated circuits which run at lower voltages than the power plane itself. The enable input ON of the CXUS7701H/L has low and high threshold voltages that accommodate this condition.The threshold voltages are compatible with 5V TTL and 2.5V to 5V CMOS. eyw嘉泰姆

Reverse Voltageeyw嘉泰姆
      The CXUS7701H/L is designed to control current flowing from IN to OUT. If a voltage is applied toeyw嘉泰姆

 OUT which is  greater than the voltage on IN, large currents may flow. This could cause damage to theeyw嘉泰姆

 CXUS7701H/L.eyw嘉泰姆

八,相关产品            更多同类产品......eyw嘉泰姆

◀ Previous:33mW 3A High Side Load Switches CXUS7736 series are 33mW high-side load switches designed to be operated from 1.5V to 5.5V The load switch that supports 1.5V logic level control and shutdown features

Back to top

Next▶:70mΩ, 3A Smart Universal Power Switch with Flag CXUS7702 is a low voltage, high performance single N-MOSFET power switch, designed for power rail on/off control with low RDS(ON)=70mΩ and full protecti