The device includes an on-chip Hall voltage, a Schmitt trigger to provide switching hysteresis for noise rejection, a temperature compensation circuit to compensate the temperature drift of Hall sensitivity and two complementary open-collector drivers for sinking large load current. It also includes an internal band-gap regulator which is used to provide bias voltage for internal circuits
-
[ CXMD3281 ]"
目录
7.相关产品
产品概述 返回TOP
The device includes an on-chip Hall voltage, a Schmitt trigger to provide switching hysteresis for noise rejection, a temperature compensation circuit to compensate the temperature drift of Hall sensitivity and two complementary open-collector drivers for sinking large load current. It also includes an internal band-gap regulator which is used to provide bias voltage for internal circuits. Placing the device in a variable magnetic field, if the magnetic flux density is larger than threshold BOP, the pin DO will be turned low (on) and pin DOB will be turned high (off). This output state is held until the magnetic flux density reverses and falls below BRP, then causes DO to be turned high (off) and DOB turned low(on). CXMD3281 is available in TO-94(SIP-4L) package.The CXMD3281 is an integrated Hall sensor with output driver designed for electronic commutation of brush-less DC motor applications.
产品特点 返回TOP
On-Chip Hall Sensor
3.5V to 20V Supply Voltage
300mA (avg) Output Sink Current
Reversed Supply Voltage Protection
-20℃ to 85℃ Operating Temperature
Low Profile TO-94 (SIP-4L) Package
High ESD Rating
应用范围 返回TOP
Dual-Coil Brush-less DC Motor
Dual-Coil Brush-less DC Fan
Revolution counting
Speed measurement
技术规格书(产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
直流风扇马达驱动 | ||||||
产品系列名 | 输入电压范围(V) | 输出电流(mA) | 工作点Bop(GS) | 管耗(MW) | 工作温度 | 封装形式 |
CXMD3280 | 3.8~24 | 350 | -35 | 2 | -40~85 | T094 |
CXMD3281 | 3.8~24 | 350 | -35 | 2 | -40~85 | T094 |
CXMD3282 | 3.5~20 | 350 | 33 | 2 | -40~85 | T094 |