Product information query
Products News
首页 > Products > Battery Charging Chip > Mobile Power Chip > 3 in 1 Mobile Power IC >CXLB74214 integrated boost converter lithium battery charging management The multifunctional power management SOC with battery level indication provides a complete backup power solution for Bluetooth headsets.
CXLB74214 integrated boost converter lithium battery charging management The multifunctional power management SOC with battery level indication provides a complete backup power solution for Bluetooth headsets.

CXLB74214 is a multifunctional power management SOC with integrated boost converter, lithium battery charge management, and battery level indication, providing a complete backup power solution for Bluetooth headsets. The high integration and rich functions of the CXLB74214 make it require only a few peripheral devices in application, and effectively reduce the size of the overall solution and reduce the BOM cost. CXLB74214 only one inductor to achieve buck and boost function. The DC-DC converter operates at 500KHz and can support low-cost inductors and capacitors. The CXLB74214 synchronous boost system provides more than 1A output current with a high conversion efficiency of 93%. When no load, automatically enter the standby state, the static current is less than 20uA, the standby state output still has the same battery voltage drive 50K resistor voltage holding function. The CXLB74214 adopts switching charging technology, providing more than 320mA, and the charging efficiency is as high as 92%. Built-in IC temperature and input voltage intelligent regulation of charging current

CXLB74214 integrated boost converter lithium battery charging management The multifunctional power management SOC with battery level indication provides a complete backup power solution for Bluetooth headsets.
Manual
Ordering

Ordering

Product introduction

Directory

  1. 1.Product overview       2.Product Features     tBV嘉泰姆

  2. 3.Scope of application       4.Technical Specification Download(PDF Document)tBV嘉泰姆

  3. 5.Product packaging       6.Circuit schematic  tBV嘉泰姆
    7.Related ProductstBV嘉泰姆

Product overview

Return to Top


CXLB74214 is a multifunctional power management SOC with integrated boost converter, lithium battery charge management, and battery level indication, providing a complete backup power solution for Bluetooth headsets. The high integration and rich functions of the CXLB74214 make it require only a few peripheral devices in application, and effectively reduce the size of the overall solution and reduce the BOM cost. CXLB74214 only one inductor to achieve buck and boost function. The DC-DC converter operates at 500KHz and can support low-cost inductors and capacitors. The CXLB74214 synchronous boost system provides more than 1A output current with a high conversion efficiency of 93%. When no load, automatically enter the standby state, the static current is less than 20uA, the standby state output still has the same battery voltage drive 50K resistor voltage holding function. The CXLB74214 adopts switching charging technology, providing more than 320mA, and the charging efficiency is as high as 92%. The built-in IC temperature and input voltage intelligently adjust the charging current. CXLB74214 support 1, 2, 3, 4 LED power display. CXLB74214 in ESOP8L package.

   Product FeaturesReturn to ToptBV嘉泰姆


synchronous switch charging and dischargingtBV嘉泰姆
◆ 1A synchronous boost conversion, 320mA synchronous switch chargingtBV嘉泰姆
◆ Boost efficiency up to 93%tBV嘉泰姆
◆ Charging efficiency up to 92%tBV嘉泰姆
◆ Built-in power path management, supporting charging and dischargingtBV嘉泰姆
ChargingtBV嘉泰姆
◆ Adaptive charging current adjustment, matching all adapterstBV嘉泰姆
◆ Charging voltage accuracy: ± 0.6%tBV嘉泰姆
◆ Support 4.20V/4.35V battery (selected by 2-pin external resistor, no resistor is 4.20V battery, and 47K to ground is 4.35V battery)tBV嘉泰姆
Electric quantity displaytBV嘉泰姆
◆ Support 4/3/2/1 LED power displaytBV嘉泰姆
Independent keytBV嘉泰姆
◆ Key to boot, double-click the key to shut downtBV嘉泰姆
Low power consumptiontBV嘉泰姆
◆ Intelligent identification of load start, small current automatically into standbytBV嘉泰姆
◆ Standby power consumption is less than 20 & micro;AtBV嘉泰姆
BOM minimalisttBV嘉泰姆
◆ Power MOS built-in, single inductor to achieve charge and dischargetBV嘉泰姆
Multiple protection, high reliabilitytBV嘉泰姆
◆ Output overcurrent, overvoltage and short circuit protectiontBV嘉泰姆
◆ Input overvoltage, overcharge, overdischarge and overcurrent discharge protectiontBV嘉泰姆
◆ Over-temperature protection of the whole machinetBV嘉泰姆
◆ ESD 4KVtBV嘉泰姆

   Scope of applicationReturn to ToptBV嘉泰姆


◆ Bluetooth headset charging bintBV嘉泰姆
◆ Portable equipment for small current operationtBV嘉泰姆

   Technical Specification (Product PDF)Return to Top tBV嘉泰姆


If you need detailed PDF specifications, please scan WeChat and contact us. You can also get free samples and technical support.!tBV嘉泰姆

      QQ截图20160419174301.jpgtBV嘉泰姆

   Product packaging diagramReturn to ToptBV嘉泰姆


         tBV嘉泰姆
   Circuit schematicReturn to ToptBV嘉泰姆


tBV嘉泰姆

  Related Chip Selection GuideReturn to Top                       More similar products......tBV嘉泰姆


TWS Bluetooth Headset Charging Stand IC
Model Function Charging operating voltage Charging current Detection accuracy Boost current StandbytBV嘉泰姆
Power consumption
Protection function Encapsulation Features
CXLB74205 Synchronous switch charging management module synchronous rectifier boost discharge management module power detection andLEDIndicating module 4.4-5.5V 0.3A 1% 1A 60uA Output overcurrent/Overvoltage/Short Circuit Protection Input Overvoltage/overcharge/over-release/Over-current discharge protection Overall over-temperature protection ESOP-8 3-4OneLEDThe lamp indicates the power level or1-2LEDIndicating status,LEDLighting function, with side charging and side placing function,6-8mAAutomatic load detection function, with button boot, adaptive charging current adjustment, matching all adapters, up to boost efficiency91%, charging efficiency up93%
CXLB74206 Synchronous switch charging management module synchronous rectifier boost discharge management module power detection andLEDIndicating module 4.4-5.5V 0.5A 1% 1A 60uA Output overcurrent/Overvoltage/Short Circuit Protection Input Overvoltage/overcharge/over-release/Over-current discharge protection Overall over-temperature protection ESOP-8 3-4OneLEDThe lamp indicates the power level or1-2LEDIndication status,BeltLEDLighting function, with side charging and side placing function,6-8mAAutomatic load detection function, with button boot, adaptive charging current adjustment, matching all adapters, up to boost efficiency91%, charging efficiency up93%
CXLB74207 Linear charge management module synchronous rectifier boost discharge management moduleLEDIndicating module 4.4-5.5V 0.7A 1% 1A 50uA Discharge output with overcurrent/Overvoltage/Over-temperature/Short circuit protection SOP-8 2OneLEDLamp indicates charge and discharge status;Button boot, load current is less20mAGo to sleep;Boost operating frequency1MHz, the highest efficiency91%,ESD 2KVOperating temperature range:-40To 85
CXLB74208 Linear charge management module synchronous rectifier boost discharge management moduleLEDIndicating module 4.4-5.5V 1A 1% 1A 100uA Discharge output with overcurrent/Overvoltage/Over-temperature/Short circuit protection ESOP-8 4LEDLamp indicates power and charge and discharge status;Boot with button,Belt20mAAutomatic detection of load current,When the load current is lower20mAMore16After seconds,The output voltage remains5.1V(but can not give the output current),LEDLight out,Remind the user that the charging of the external device has ended. Boost operating frequency1MHz,Efficiency up90%,BeltLEDLighting,ESD 2KVOperating temperature range:-40To 85
CXLB74210 Linear charge management module synchronous rectifier boost discharge management moduleLEDIndicating module 4.5-5.25VWithstand voltage7.0V 0.15A 1% 0.5A/ 18uA Load over-current input over-voltage output current limiting output short-circuit chip over-temperature protection SOP-8 Boost efficiency up90%;Support side filling and side placing;Support2 LEDLamp charge and discharge indication and abnormality;With trickle/Constant current/Constant voltage three-stage charging; with button to turn on the boost;Long press to turn off the boost;After boost load;The indicator light is on8Extinguished after seconds;With automatic load identification function, automatically turn on the boost output after detecting the load; no-load detection turns off the boost function, and the judgment current is about5-15mAPower on the input power/Power down,Battery automatic boost power supply; boost working frequency1MHz,Support1.5uHInductance,Built-inMOS;Operating temperature range:-40To 85
CXLB74211 Linear charge management module synchronous rectifier boost discharge management moduleLEDIndicating module 4.4-5.5V 0.38A 1% 0.7A 60uA Output Short Circuit Protection Heavy Duty Protection Input6VOver-voltage protection intelligent temperature adjustment function SOP-8 2LEDThe lamp indicates the charging and discharging state, and the power path management with protection is built in, which supports charging and discharging at the same time. Automatic detection of load startup+Press the key to click the boot; automatic detection load shutdown+Press the key for a long time to shut down; the automatic shutdown current threshold is6.5mA; The headset is not in the warehouse. Ultra-low standby current only7uA; Boost working frequency1MHz, support1.5uHInductors, Built-inMOSESD(HBM)2KVOperating temperature range:-40To 85
CXLB74212 Linear charge management module synchronous rectifier boost discharge management moduleLEDPower detection and indication module 4.4-5.5V 0.38A 1% 0.8A 60uA Output Short Circuit Protection Heavy Duty Protection Input6VOver-voltage protection intelligent temperature adjustment function ESOP-8 4LEDThe lamp indicates the power and charge and discharge status, and has built-in power path management with protection, supporting charging and discharging at the same time. Automatically detect load startup+Press the key to click the boot; automatic detection load shutdown+Press the key for a long time to shut down; the automatic shutdown current threshold is6.5mA; The headset is not in the warehouse. Ultra-low standby current7uA; Boost working frequency1MHz, support1.5uHInductors, Built-inMOSESD(HBM)2KVOperating temperature range:-40To 85
CXLB74213 Linear charge management module synchronous rectifier boost discharge management moduleLEDIndicating module 4.4-5.5V 0.38A 3% 0.8A 50uA Output Short Circuit Protection Heavy Duty Protection Input6VOver-voltage protection intelligent temperature adjustment function SOP-8 2LEDLamp indicates charge and discharge status,Support Hall drive to realize cover opening and return connection:Open cap output high level,Cover Output Low,With enable end,If the enable is high, the boost is turned off.,When the enable is low, the boost is normally open.,Working current90uA,If the load current is less10mATurn off the indicator light.,Built-in power path management with protection,Support side filling and side placing;Boost operating frequency1MHz, support1.5uHInductors, Built-inMOSESD(HBM)2KVOperating temperature range:-40To 85
CXLB74214 Synchronous switch charging management module Synchronous rectifier boost discharge management moduleLEDPower detection and indication module 4.75-5.5V 0.32A 0.60% 1.0A 20uA Output overcurrent/Overvoltage/Short Circuit Protection Input Overvoltage/overcharge/over-release/Over-current discharge protection Overall over-temperature protection ESOP-8 1-4LEDThe lamp indicates the power and charge and discharge status, and the boost efficiency is up93%, charging efficiency up92%; Built-in power path management, support while charging; Support4.20V/4.35VBattery (2Selection of external resistance of foot: non-connected resistance is4.20Vbattery, connected47KTo the ground4.35Vbattery), full voltage4.22V/4.37V; Adaptive charging current adjustment, matching all adapters; support4/3/2/1ALEDPower display; with a button to start, double-click the button to shut down; with intelligent automatic identification of load start,5mASmall current automatically into standby; Boost working frequency500KHz; Built-inMOS, single inductor to realize charging and discharging;ESD 4KVOperating temperature range:0To 70
CXLB74215 Synchronous switch charging management module Synchronous rectifier boost discharge management moduleLEDPower detection and indication module 4.75-5.5V 0.3A 0.60% 0.3A 5uA Output overcurrent/Overvoltage/Short Circuit Protection Input Overvoltage/overcharge/over-release/Over-current discharge protection Overall over-temperature protection ESOP-8 1-4LEDThe lamp indicates the power and charge and discharge status, and the boost efficiency is up93%, charging efficiency up92%; Built-in power path management, support while charging; Support4.20V/4.35VBattery (2Selection of external resistance of foot: non-connected resistance is4.20Vbattery, connected47KTo the ground4.35Vbattery), full voltage4.22V/4.37V; Adaptive charging current adjustment, matching all adapters; support4/3/2/1ALEDPower display; with a key to boot, double-click the button to shut down;8Seconds automatically turn off the light, click to view the power; with intelligent automatic identification of load start, automatic detection of Bluetooth headset in and out,5mASmall current automatically into standby; Boost working frequency500KHz; Built-inMOS, single inductor to realize charging and discharging;ESD 4KVOperating temperature range:0To 70
CXLB74216 Synchronous switch charging management module Synchronous rectifier boost discharge management moduleLEDPower detection and indication module 4.75-5.5V 1.1A 0.60% 1.5A 20uA Output overcurrent/Overvoltage/Short Circuit Protection Input Overvoltage/overcharge/over-release/Over-current discharge protection Overall over-temperature protection ESOP-8 1-4LEDThe lamp indicates the power and charge and discharge status, and the boost efficiency is up93%, charging efficiency up92%; Built-in power path management, support while charging; Support4.20V/4.35VBattery (2Selection of external resistance of foot: non-connected resistance is4.20Vbattery, connected47KTo the ground4.35Vbattery), full voltage4.22V/4.37V; Adaptive charging current adjustment, matching all adapters; support4/3/2/1ALEDPower display; Turn on with key, double-click the key to turn off, and press the key to turn on for a long time./OffLEDlighting; built-inLEDLighting drive, no current limiting resistor; with intelligent automatic identification of load start, automatic detection of load insertion and pull out,5mASmall current automatically into standby; Boost working frequency500KHz; Built-inMOS, single inductor to realize charging and discharging;ESD 4KVOperating temperature range:0To 70
CXLB74217 Synchronous switch charging management module Synchronous rectifier boost discharge management moduleLEDPower detection and indication module 4.60V-5.5VWithstand voltage6.0V 0.42A 0.60% 0.8A 15uA-25uA With temperature compensation/over-temperature protection/overcharge and overdischarge protection/With output overvoltage/Overloading/Short circuit protection ESOP-8 2LEDLamp indicates charge and discharge status, boost/Charging efficiency up94%; Support charging and discharging; Full voltage4.2V, accuracy±1%; Adaptive charging current adjustment, matching all adapters; Support trickle charging and0VCharging; with a button to start, double-click the button to shut down; automatic switch machine, with intelligent automatic identification of load start,7.5mASmall current automatically into standby; Boost working frequency500KHz; Built-inMOS, single inductor to realize charging and discharging;ESDHBM3.5KVOperating temperature range:-20To 85
CXLB74218 Synchronous switch charging management module Synchronous rectifier boost discharge management moduleLEDPower detection and indication module 4.60V-5.5VWithstand voltage6.0V 0.42A 0.60% 0.8A 15uA-25uA With temperature compensation/over-temperature protection/overcharge and overdischarge protection/With output overvoltage/Overloading/Short circuit protection ESOP-8 4LEDThe lamp indicates the state of power and charge and discharge, and supports charging and discharging at the same time. Full voltage4.2V, accuracy±1%; Adaptive charging current adjustment, matching all adapters; Support trickle charging and0Vcharging; support4LEDPower display; with a button to start, double-click the button to shut down; automatic switch machine, with intelligent automatic identification of load start,7.5mASmall current automatically into standby; Boost working frequency500KHz; Built-inMOS, single inductor to realize charging and discharging;ESDHBM3.5KVOperating temperature range:-20To 85