CXAR41191The CXAR41191 stereo headphone amplifier is designed for portable equipment where board space is at a premium. The CXAR41191 uses capless architecture to produce aground-referenced output from a single power supply, eliminating the need for large DC-blocking capacitors for output, saving cost, board space, and component height. Additionally, for CXAR41191B, the gain is set internally (-2V/V), further reducing component count. For CXAR41191A, the gain can be adjusted by external feedback resistors.
The CXAR41191 delivers up to 80mW per channel into a 32Ω load and has low 0.03% THD+N. A -78dB power supply rejection ratio (PSRR) at 217Hz allows this device to operate from noisy digital supplies without an additional linear regulator. Comprehensive click-and-pop circuitry suppresses audible clicks and pops on startup and shutdown.
The CXAR41191 operates from a single 2.7V to 5.1V supply, consumes only 5.8mA supply current, has short-circuit and thermal-overload protections, and is specified over the extended -40℃ to +85℃ temperature range. The CXAR41191 is available in a Green TDFN-3×3-10L package.
-
[ CXAR41191 ]"
目录
7.相关产品
产品概述 返回TOP
The CXAR41191 stereo headphone amplifier is designed for portable equipment where board space is at a premium. The CXAR41191 uses capless architecture to produce aground-referenced output from a single power supply, eliminating the need for large DC-blocking capacitors for output, saving cost, board space, and component height. Additionally, for CXAR41191B, the gain is set internally (-2V/V), further reducing component count. For CXAR41191A, the gain can be adjusted by external feedback resistors.
The CXAR41191 delivers up to 80mW per channel into a 32Ω load and has low 0.03% THD+N. A -78dB power supply rejection ratio (PSRR) at 217Hz allows this device to operate from noisy digital supplies without an additional linear regulator. Comprehensive click-and-pop circuitry suppresses audible clicks and pops on startup and shutdown.
The CXAR41191 operates from a single 2.7V to 5.1V supply, consumes only 5.8mA supply current, has short-circuit and thermal-overload protections, and is specified over the extended -40℃ to +85℃ temperature range. The CXAR41191 is available in a Green TDFN-3×3-10L package.
产品特点 返回TOP
• CXAR41191A: External Feedback Gain Network
CXAR41191B: Fixed -2V/V Gain
• No Bulky DC-Blocking Capacitors Required
• Ground-Referenced Outputs Eliminate DC-Bias
Voltage on Headphone Ground Pin
• No Degradation of Low-Frequency Response Due
to Output Capacitors
• 80mW into 32Ω Load from 5V Power Supply at
THD+N = 0.1% (TYP, per Channel)
• Low 0.03% THD+N
• High PSRR (-78dB at 217Hz)
• Integrated Click-and-Pop Suppression
• 2.7V to 5.1V Single Supply Operation
• Low Quiescent Current (5.8mA at VDD = 5V)
• Shutdown Control
• Short-Circuit and Thermal-Overload Protections
• Undervoltage Lockout Function
• -40℃ to +85℃ Operating Temperature Range
• Available in Green TDFN-3×3-10L Package
应用范围 返回TOP
Notebook PCs
Cellular Phones
PDAs
MP3 Players
Smart Phones
Portable Audio Equipment
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
耳机驱动器 |
||||||||
|
Part Number |
CH |
SHDN |
VCC(Min) (V) |
VCC(Max)(V) |
Differential Input |
Output Power/CH @RL=16Ω(mW) |
Output Power/CH @RL=32Ω(mW) |
Package |
|
Stereo |
L |
2.5 |
5.5 |
N |
158 |
87 |
MSOP-8 |
|
|
Stereo |
H |
2.5 |
5.5 |
N |
158 |
87 |
MSOP-8 |
|
|
Stereo |
H |
2.7 |
5.5 |
Y |
132 |
82 |
MSOP-10 |
|
|
Stereo |
L |
2.7 |
5.5 |
N |
95 |
TQFN-4x4-20L |
||
|
Stereo |
L |
2.5 |
5.5 |
N |
145 |
85 |
TDFN-2x2-8L |
|
|
Stereo |
L |
2.7 |
5.5 |
N |
88 |
TQFN-3x3-12L |
||
|
Stereo |
L |
2.7 |
5.5 |
Y |
80 |
TQFN-3x3-16L |
||
|
Stereo |
L |
2.7 |
5.1 |
N |
80 |
TDFN-3x3-10L |
||
