The CXAD4159 is a high-efficiency, filterless Class-D audio
power amplifier with automatic level control (ALC). It operates
from 2.7V to 5.5V supply.When powered with 5V supply voltage, the
CXAD4159 is capable of delivering 3.2W into 4Ω load or 1.8W into
8Ω load with 10% THD+D.The CXAD4159 features ALC on the audio output
signals, which detects the output clipping caused by the over-level
-
[ CXAD4159 ]"
目录
1.产品概述 2.产品特点
3.应用范围 4.下载产品资料PDF文档
5.产品封装图 6.电路原理图
7.功能概述 8.相关产品
一,产品概述(General Description)
The CXAD4159 is a high-efficiency, filterless Class-D audio power amplifier with automatic level control (ALC). It operates from 2.7V to 5.5V supply.When powered with 5V supply voltage, the CXAD4159 is capable of delivering 3.2W into 4Ω load or 1.8W into 8Ω load with 10% THD+D.The CXAD4159 features ALC on the audio output signals, which detects the output clipping caused by the over-level input signal and utomatically adjusts the voltage gain of the amplifier to eliminate the clipping while maintaining the maximally-allowed dynamic range of the audio output signals. The ALC also eliminates the output clipping due to low battery supply voltage.As a Class-D power amplifier, the ft2045 features high efficiency (up to 88%) and high PSRR (70dB at 217Hz), which make the device ideal for use in battery-powered portable devices. It also features minimized click-and-pop noise during turn-on and turn-off transitions.
二.产品特点(Features)
Filterless Class-D operation
Automatic level control to eliminate output clipping
High efficiency up to 90%
Maximum output power at 5V supply (ALC Off)
3.2W (4Ω load, 10% THD+N)
1.8W (8Ω load, 10% THD+N)
Constant output power at 5V supply (ALC On)
2.4W (4Ω load, THD+N < 0.6%)
1.35W (8Ω load, THD+N < 0.5%)
Constant output power at 3.6V supply (ALC On)
1.2W (4Ω load, THD+N < 0.6%)
0.7W (8Ω load, THD+N < 0.5%)
Low THD+N < 0.05% (VDD=3.6V, f=1kHz, RL=8Ω, PO=0.5W)
Low quiescent current: 2.2mA @ VDD=3.6V
Low shutdown current < 0.1μA
High PSRR: 75dB @ 217Hz
Short-circuit & thermal overload protection
Fast startup time: 4ms
Available in MSOP-8L package
三,应用范围 (Applications)
Cellular handsets
Portable navigation devices
Multimedia internet devices
四.下载产品资料PDF文档
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!
五,产品封装图 (Package)
SYMBOL |
MSOP-8L |
DESCRIPTION |
VREF |
2 |
Analog reference at VDD/2, the common-mode bias for audio inputs. |
INP |
3 |
Positive audio input terminal. |
INN |
4 |
Negative audio input terminal. |
VON |
5 |
Negative BTL audio output terminal. |
VDD |
6 |
Power supply. |
GND |
7 |
Power ground. |
VOP |
8 |
Positive BTL audio output terminal. |
六.电路原理图
七,功能概述
APPLICATIONS INFORMATION
The CXAD4159 is a high-efficiency, filterless Class-D audio power amplifier with automatic level control (ALC). It operates from 2.7V to 5.5V supply. When powered with 5V supply voltage, the CXAD4159 is capable of delivering 3.2W into 4Ω load or 1.8W into 8Ω load, with 10% THD+N. When operated in ALC mode with 5V supply voltage, the JTCXAD4159s capable of delivering 2.4W into 4Ω load or 1.35W into 8Ω load, with THD+D less than 0.5%.
The JTM145CXAD4159res ALC on the audio output signals, which detects the output clipping caused by the over-level input signal and automatically adjusts the voltage gain of the amplifier to eliminate the clipping while maintaining the maximally-allowed dynamic range of the audio output signals. The ALC also eliminates the output clipping due to low battery supply voltage. In addition, the JTM145 featureCXAD4159lterless PWM modulator that eliminates the need for an external LC filter, therefore reducing the number of external components, the PCB board space, and the system cost.In this manner, the power efficiency is also improved.
As specifically designed for portable applications, the CXAD4159 incorporates CXAD4159 down mode to minimize the power consumption by holding the CTRL pin to ground. It also includes comprehensive protection features against various operating faults such as over-current, short-circuit, over-temperature, or under-voltage for a safe and reliable operation.
AUTOMATIC LEVEL CONTROL (ALC)
The automatic level control is to maintain the audio output signals for a maximum voltage swing without distortion when an excessive input that may cause output clipping is applied. With the ALC function, theCXAD4159 lowers the voltage gain of the amplifier to an appropriate value such that the clipping at the outputs is eliminated. It also eliminates the clipping of the output signal due to the reduction of the power-supply voltage.
八,相关产品 更多同类产品.......
D类音频放大IC | ||||||
型号 | 电压范围 | 静态电流 | 输出功率 | 静态输出电压 | 纹波抑制比 | 封装 |
CXAD4173 | 2.4V-5.5V | 3.8mA | 3.0W/Vcc=5V Rl=4ohm | 1mV/Vcc=5V | 75dB | MSOP-8 SOP-8 |
CXAD4158 | 2.5V-6.5V | 4mA | 4.7W/Vcc=6.5V Rl=4ohm | 6mV/Vcc=5V | 70dB | SOP8 |
CXAD4159 | 2.7V-5.5V | 0.1uA | 3.2W/Vcc=5VRl=4ohm | 10mV/Vcc=5V | 75dB | MSOP8 |
CXAD4160 | 2V-5.5V | 5W/Vcc=5V Rl=2ohm | ESOP8 | |||
CXAD4161 | 2.0V-5.5V | 16mA | 2*3.2W/Vcc=5V Rl=4ohm | 5mV/Vcc=6V | 58dB | SOP16 |
CXAD4162 | 2.8V-5.0V | 8mA | 2*5.2W/Vcc=5V Rl=2ohm | 10mV/Vcc=6V | 80dB | ESOP16 |
CXAD4163 | 3.0V-9.0V | 21mA | 2*9.5W/Vcc=8.5V Rl=4ohm | 6.5mV/Vcc=6V | 91dB | ESOP16 |
CXAD4164 | 2.5V-6.5V | 6.5mA | 2*4.7W/Vcc=6.5V Rl=4ohm | 6mV/Vcc=6V | 91dB | SOP16 |
带升压的D类音频放大IC | ||||||
型号 | 电压范围 | 静态电流 | 输出功率 | 静态输出电压 | 纹波抑制比 | 封装 |
CXAD4165 | 2.5V-5.5V | 8mA | 7W/Vcc=4.2V,Rl=3ohm | 90dB | SOP16-PP |