• [ CXAR41173 ]"

Ordering

目录

1.产品概述       2.产品特点     rLL嘉泰姆

3.应用范围       4.技术规格书下载（PDF文档）rLL嘉泰姆

5.产品封装       6.电路原理图  rLL嘉泰姆

7.相关产品rLL嘉泰姆

   产品概述 返回TOPrLL嘉泰姆

       CXAR41173B 为一款高效率，2通道全桥式驱动（BTL）D类音频放大器。在工作电压为16V，输出负载为8Ω的扬声器上，每个通道可以输送出15W/10%的输出功率及失真度。CXAR41173B其内部采用全差动输入设计，比起单端输入更能有效抑制噪声。利用G0和G1连个引脚，可以选择增益为20，26，32或是36dB。改进的EMI抑制技术使得在输出端可以使用廉价的铁氧体磁珠同时满足电磁兼容性要求。CXAR41173B内置扬声器保护电路，以限制流过扬声器的电流值。同时AGC可以检测出由于输入信号过大而引起的输出信号clip并自动抑制clip。CXAR41173B提供短路保护和过热保护，以避免芯片的损毁。CXAR41173B采用28-pin TSSOP封装。The CXAR41173B is a high efficiency, 2 channel bridged-tied load (BTL), class-D audio power amplifier. Operating from a 16V power supply, CXAR41173B is capable of delivering 15W/ channel of continuous output power to a 8Ω load with 10% THD+N. The CXAR41173B features a differential input architecture offering improved noise immunity over a single-ended (SE) input amplifier. Amplifier gain is internally configured and can be selected to 20, 26, 32 or 36dB utilizing the G0 and G1 gain select pins. Advanced EMI suppression technology enables the use of inexpensive ferrite bead at the outputs while meeting EMC requirements. The speaker protection circuitry is integrated into CXAR41173B to limit the amount of current through the speaker. Meanwhile, the AGC detects output signal clip due to the over level input signal and suppresses it automatically. The CXAR41173 also features short-circuit and thermal protection preventing the device from being damaged during a fault condition. The CXAR41173 is available in thermally efficient 28-pin TSSOP package.

   产品特点 返回TOPrLL嘉泰姆

•工作电压：5.5V到26VrLL嘉泰姆

•独特的调制方式减少EMI干扰rLL嘉泰姆

•负载8Ω，工作电压16V，单一通道输出功率可达15WrLL嘉泰姆

•负载8Ω，工作电压13V，单一通道输出功率可达10WrLL嘉泰姆

•单个4Ω负载，工作电压16V，输出功率可达30WrLL嘉泰姆

•效率高达87%D类操作模式可以降低热消耗rLL嘉泰姆

•四种可选增益rLL嘉泰姆

•全差分输入rLL嘉泰姆

•扬声器保护电路rLL嘉泰姆

•自动增益控制（AGC）和功率限制rLL嘉泰姆

•具有过温及短路保护机制rLL嘉泰姆

•28-pin TSSOP封装rLL嘉泰姆

•符合RoHS规范及Pb-FreerLL嘉泰姆

Wide Supply Voltage: 5.5V to 26VrLL嘉泰姆

Unique Modulation Scheme Reduces EMI EmissionrLL嘉泰姆

15-W/ch into an 8-
Load From a 16-V SupplyrLL嘉泰姆

10-W/ch into an 8-
Load From a 13-V SupplyrLL嘉泰姆

30W into a 4-
Mono Load From a 16-V SupplyrLL嘉泰姆

87% Efficient Class-D Operation EliminatesrLL嘉泰姆

Need for Heat SinksrLL嘉泰姆

Four Selectable, Gain SettingsrLL嘉泰姆

Differential InputsrLL嘉泰姆

Speaker Protection CircuitryrLL嘉泰姆

Auto Gain Control and Power ClamprLL嘉泰姆

Thermal and Short-Circuit ProtectionrLL嘉泰姆

28-pin TSSOP Package with Thermal PadrLL嘉泰姆

RoHS compliant and 100% lead(Pb)-freerLL嘉泰姆

Halogen-FreerLL嘉泰姆

   应用范围 返回TOPrLL嘉泰姆

•电视
TelevisionsrLL嘉泰姆

   技术规格书（产品PDF) 返回TOP rLL嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！rLL嘉泰姆

 rLL嘉泰姆

产品封装图 返回TOPrLL嘉泰姆

arLL嘉泰姆

电路原理图 返回TOPrLL嘉泰姆

 rLL嘉泰姆

rLL嘉泰姆

相关芯片选择指南 返回TOP             更多同类产品.......

◀ Previous:The CXAR41172 is a high efficiency, mono bridged-tied load (BTL), class-D audio power amplifier. Operating from a 12V power supply,

Back to top

Next▶:The CXAR41174B is a high efficiency, 2 channel bridged-tied load (BTL), class-D audio power amplifier. Operating from a 10V power supply,