• [ CXAR41171 ]"

Ordering

目录

1.产品概述       2.产品特点     vfY嘉泰姆

3.应用范围       4.技术规格书下载（PDF文档）vfY嘉泰姆

5.产品封装       6.电路原理图  vfY嘉泰姆

7.相关产品vfY嘉泰姆

   产品概述 返回TOPvfY嘉泰姆

       CXAR41171是一款高效率的，3W单声道的D类音频放大器。它用一种低噪声的、filterlessPWM的架构，无需输出滤波器，减少外围器件数，降低系统成本，简化系统设计。当电源电压为5V时，CXAR41171 能在输出负载为4Ω的扬声器上，输送出3W/10%或2W/1%的输出功率及失真度。与AB类放大器相比，CXAR41171具有高效能的特性。当电源电压3.6 V而输出负载为8Ω扬声器，输出功率400 mW时其效率为88%。在移动电话听筒及耳机的装置上，CXAR41171是能输出悦耳音调的音频功率放大器。CXAR41171的放大音量是允许由外部各音源独立控制的。CXAR41171采用TDFN以及WCSP封装。The CXAR41171 is a high efficiency, 3W mono class-D audio power amplifier. A low noise, filterless PWM architecture eliminates the output filter, reducing external component count, system cost, and simplifying design. Operating in a single 5V supply, CXAR41171 is capable of driving 4Ω speaker load at a continuous average output of 3W/10% THD+N or 2W/1% THD+N. The CXAR41171 has high efficiency with speaker load compared to a typical class AB amplifier. With a 3.6V supply driving an 8Ω speaker , the efficiency for a 400mW power level is 88%. In cellular handsets, the earpiece, speaker phone, and melody ringer can each be driven by the CXAR41171. The gain of CXAR41171 is externally configurable which allows independent gain control from multiple sources by summing signals from separate sources. The CXAR41171 is available in space-saving WCSP and TDFN packages.

   产品特点 返回TOPvfY嘉泰姆

• 单一调变方案来减少EMI干扰vfY嘉泰姆

• 工作电压3.6V,负载8Ω的扬声器:vfY嘉泰姆

- 输出功率400mW时，效率高达88%vfY嘉泰姆

- 输出功率100mW时，效率高达80%vfY嘉泰姆

• 静态电流 2.4mA，关断电流0.5uAvfY嘉泰姆

• 工作电压2.5 V至5.5 VvfY嘉泰姆

• 采用优化的PWM输出架构，无需输出LC滤波器vfY嘉泰姆

• 高PSRR(-72dB)，无需稳压器vfY嘉泰姆

• 全差动设计用以抑制射频干扰，无需旁通电容vfY嘉泰姆

• 高CMRR，输入无需耦合电容器vfY嘉泰姆

• 内部工作频率250kHzvfY嘉泰姆

• 内含POP 及Click噪音抑制电路vfY嘉泰姆

• 1.5mmx1.5mm WCSP 及 3mmx3mm TDFN-8 封装vfY嘉泰姆

• 符合RoHS规范及Pb-FreevfY嘉泰姆

Unique Modulation Scheme Reduces EMI EmissionsvfY嘉泰姆

Efficiency at 3.6V With an 8-Ω Speaker:vfY嘉泰姆

− 88% at 400 mWvfY嘉泰姆

− 80% at 100 mWvfY嘉泰姆

 Low 2.4-mA Quiescent Current andvfY嘉泰姆

0.5-μA Shutdown CurrentvfY嘉泰姆

2.5V to 5.5V Wide Supply VoltagevfY嘉泰姆

Shutdown Pin Compatible with 1.8V Logic GPIOvfY嘉泰姆

Optimized PWM Output Stage EliminatesvfY嘉泰姆

LC Output FiltervfY嘉泰姆

 Improved PSRR (−72 dB) Eliminates Need for avfY嘉泰姆

Voltage RegulatorvfY嘉泰姆

 Fully Differential Design Reduces RF RectificationvfY嘉泰姆

and Eliminates Bypass CapacitorvfY嘉泰姆

 Improved CMRR Eliminates Two InputvfY嘉泰姆

Coupling CapacitorsvfY嘉泰姆

 Internally Generated 250-kHz SwitchingvfY嘉泰姆

FrequencyvfY嘉泰姆

 Integrated Pop and Click Suppression CircuitryvfY嘉泰姆

 1.5mm× 1.5mm Wafer Chip Scale Package (WCSP)vfY嘉泰姆

and 3mm× 3mm TDFN-8 packagevfY嘉泰姆

 RoHS compliant and 100% lead(Pb)-freevfY嘉泰姆

   应用范围 返回TOPvfY嘉泰姆

• 无线或移动电话和PDA应用vfY嘉泰姆

Ideal for Wireless or cellular Handsets and PDAsvfY嘉泰姆

   技术规格书（产品PDF) 返回TOP vfY嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！vfY嘉泰姆

 vfY嘉泰姆

产品封装图 返回TOPvfY嘉泰姆

avfY嘉泰姆

电路原理图 返回TOPvfY嘉泰姆

vfY嘉泰姆

相关芯片选择指南 返回TOP                更多同类产品.......

 vfY嘉泰姆

◀ Previous:The CXAR41170 is a high efficiency, 2.5W/channel stereo class-D audio power amplifier. A low noise, filterless PWM architecture eliminates the output filter. Operating from a single 5V supply

Back to top

Next▶:The CXAR41172 is a high efficiency, mono bridged-tied load (BTL), class-D audio power amplifier. Operating from a 12V power supply,