The CXAB4110B is a mono Class-AB audio power amplifier designed for demanding applications in mobile phones and other portable media devices. It is capable of delivering 1.25W of continuous output power to an 8Ω BTL load with less than 1% distortion (THD+N) from a 5VDC power supply.

-
[ CXAB4110B ]"
目录
产品概述 返回TOP
The CXAB4110B is a mono Class-AB audio power amplifier designed for demanding applications in mobile phones and other portable media devices. It is capable of delivering 1.25W of continuous output power to an 8Ω BTL load with less than 1% distortion (THD+N) from a 5VDC power supply.
The CXAB4110B is specifically designed to provide high quality output power with a minimal number of external components. The CXAB4110B does not require output coupling capacitors or bootstrap capacitors, and is therefore ideal for use in mobile phones and other low voltage applications where minimal power consumption is a primary requirement.
The CXAB4110B features a low-power shutdown mode. In the shutdown mode where a logic low is applied onto the SD pin, the amplifier is completely turned off and no supply current will flow through the device.
The CXAB4110B also features advanced pop & click circuitry which eliminates noise which would otherwise occur during turn-on and turn-off transitions. The CXAB4110B is unity-gain stable and can be configured by external gain-setting resistors.
产品特点 返回TOP
Ultra low current in shutdown mode
Low quiescent current
Improved pop & click circuitry eliminates noise during turn-on and turn-off transitions Supports both single-end and differential inputs
Wide operating voltage range: 2.5 ~ 5.5V
No output coupling capacitors, snubber networks or bootstrap capacitors required
Available in space-saving package COL1.5X1.5-9L MSOP-8L
应用范围 返回TOP
Mobile phone
PDA
Portable electronic devices
技术规格书(产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
AB类音频放大IC |
|||||||
型号 |
电压范围 |
静态电流 |
输出功率 |
静态输 出电压 |
纹波抑 制比 |
通道隔 离度 |
封装 |
2V-5.5V |
6mA |
2*2.5W/Vcc=5V Rl=3ohm |
50mV/Vcc=5V |
67dB |
90dB |
TSSOP20-PP/SOP16/DIP16 |
|
2.5V-5.5V |
4mA |
1W/Vcc=5V Rl=8ohm |
7mV/Vcc=5V |
62dB |
MSOP8 |
||
2.5V-5.5V |
2.5mA |
1.25W/Vcc=5VRl=8ohm |
7mV/Vcc=5V |
62dB |
MSOP-8 |
||
2V-5.5V |
6.5mA |
2.5W/Vcc=5V Rl=4ohm |
5mV/Vcc=5V |
60dB |
SOP8 |
||
2V-5.5V |
3.5mA |
2W/Vcc=5V Rl=4ohm |
5mV/Vcc=5V |
65dB |
SOP8 |
||
2V-5.0V |
7.5mA |
3W/Vcc=5V Rl=4ohm |
5mV/Vcc=5V |
70dB |
SOP8 |
||
2V-5.0V |
7.5mA |
3.1W/Vcc=5VRl=4ohm |
5mV/Vcc=5V |
70dB |
ESOP8 |
||
4.5V-22V |
30mA |
32W/Vcc=+-22V Rl=4ohm |
45dB |
TO-220B-5L |
|||
2V-5.5V |
6.5mA |
2W/Vcc=5V Rl=3ohm |
5mV/Vcc=5V |
60dB |
SOP8 |
||
8V-18V |
44mA |
10W/Vcc=15V Rl=2.0ohm |
30dB |
TO-220B-5L |
|||
6V-22V |
50mA |
14W/Vcc=19V Rl=4ohm |
2mV |
54dB |
TO220B-5L |
||
4.5V-22V |
30mA |
32W/Vcc=+-22V |
45dB |
TO-220B-5L |
|||
1.8V--6V |
6mA |
2*0.35W/Vcc=3V |
1.2V/Vcc=3V |
30dB |
50dB |
SOP8/DIP8 |
|
3V--12V |
40mA |
2*2.3W/Vcc=9V Rl=4ohm |
4.5V/Vcc=9V |
46dB |
55dB |
DIP16/SOP16 |
|
3V--9V |
40mA |
2*2.3W/Vcc=9V Rl=4ohm |
4.5V/Vcc=9V |
46dB |
55dB |
DIP16 |