• [ CXLC8995/A ]"

Ordering

目录

1.产品概述       2.产品特点     sax嘉泰姆

3.应用范围       4.技术规格书下载（PDF文档）sax嘉泰姆

5.产品封装       6.电路原理图  sax嘉泰姆

7.相关产品sax嘉泰姆

   产品概述 返回TOPsax嘉泰姆

The CXLC8995/A includes a high-performance boost regulator, a low dropout linear regulator (LDO), a gate pulse modulator (GPM), a voltage detector, a VCOM buffer (unity-gain OPA), and a VGH charge pump controller for activematrix thin-film transistor (TFT) liquid-crystal displays (LCDs). The boost converter provides the regulated supply voltage for the panel source driver ICs. The converter is a high switching frequency (640kHz or 1.2MHz) currentmode regulator with an integrated 20V N-Channel 0.2Ω MOSFET that allows the use of ultra-small inductors and ceramic capacitors. It provides fast transient response to pulsed loading while achieving efficiency over 90%. The device can produce output voltage as high as 18V from an input as low as 2.8V. Soft-Start is programmed by external capacitor, which sets the input-current ramp-rate. The low-dropout (LDO) linear regulator can supply up to 350mA current while input voltage is 3.3V. It uses an internal PMOS as the pass device. It is suitable for the supply voltage of the timing controller. The GPM is controlled by frame signals from timing controller to modulate the Gate-On voltage, VGHM, which acts a flicker compensation circuit to reduce the coupling effect between gate lines and pixels. It also can delay the Gate-On voltage while power-on for achieving a corrected power-on sequence for gate driver ICs. Both of power-on delay time and the falling time of the Gate-On voltage are programmable by external capacitor and resistor. The voltage detector monitors the supply voltage to issue a reset signal while the detected voltage is too low. The detecting level is decided by an external resistor divider and the delay time is programmable by an external capacitor. The VCOM buffer can drive the LCD VCOM voltage that features high short-circuit current (150mA), fast slew rate (12V/μs), wide bandwidth (12MHz) and rail-to-rail input/output. The VGH charge pump controller provides regulated TFT Gate-On voltage. The regulation of the positive charge pump is generated by the internal comparator that senses the output voltage and compares it with an internal reference.

   产品特点 返回TOPsax嘉泰姆

„ 2.5V to 5.5V Input Supply Range sax嘉泰姆

„ 640kHz/1.2MHz Current-Mode Boost Regulator sax嘉泰姆

Š Fast Transient Response to Pulse Load sax嘉泰姆

Š ±1% Accurate Output Voltage sax嘉泰姆

Š Built-In 20V/2A, 0.2Ω N-Channel MOSFET sax嘉泰姆

Š High Efficiency up to 90% sax嘉泰姆

Š Programmable Soft-Start sax嘉泰姆

Š Over-Current Protection sax嘉泰姆

Š Output Under-Voltage Protection sax嘉泰姆

„ High-Performance Operational Amplifiers ±150mA Output Short-Circuit Current sax嘉泰姆

Š 12V/μs Slew Rate sax嘉泰姆

Š 12MHz, -3dB Bandwidth sax嘉泰姆

Š Rail-to-Rail Input and Output sax嘉泰姆

„ Low Dropout Voltage Linear Regulator sax嘉泰姆

Š 350mA Maximum Output Current sax嘉泰姆

Š Adjustable Output Voltage sax嘉泰姆

„ On-Chip GPM Controller sax嘉泰姆

Š Adjustable Falling Time and Power-On Delay sax嘉泰姆

Š Flicker Compensator sax嘉泰姆

Š Power-On Sequence Control sax嘉泰姆

„ Charge pump for VGH regulation sax嘉泰姆

„ Low Voltage Detector sax嘉泰姆

 Š Programmable Detecting Voltage and Delay Time sax嘉泰姆

„ Thermal-Overload Protection sax嘉泰姆

„ RoHs Compliant sax嘉泰姆

„ TQFN4X4-24 Packagesax嘉泰姆

   应用范围 返回TOPsax嘉泰姆

„ LCD Monitor sax嘉泰姆

„ Notebook Computer Displays sax嘉泰姆

„ LCD TVssax嘉泰姆

   技术规格书（产品PDF) 返回TOP sax嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！sax嘉泰姆

 sax嘉泰姆

产品封装图 返回TOPsax嘉泰姆

sax嘉泰姆

电路原理图 返回TOPsax嘉泰姆

asax嘉泰姆

相关芯片选择指南 返回TOP                            更多同类产品......

◀ Previous:CXLC8994A/S

Back to top

Next▶:Integrated Power Supply for TFT-LCD Panels with 4-Channel White LED Driver CXLC8996A includes a high-performance boost regulator, 4-channel LED driver, a low dropout linear regulator (LDO)