• [ CXLE8195 ]"

Ordering

目录

1.产品概述       2.产品特点     pgs嘉泰姆

3.应用范围       4.技术规格书下载（PDF文档）pgs嘉泰姆

5.产品封装       6.电路原理图  pgs嘉泰姆

7.相关产品pgs嘉泰姆

   产品概述 返回TOPpgs嘉泰姆

With a 40V rated integrated switch FET, the CXLE8195 is a boost converter that drives LEDs in series. The boost converter has a 40V, 3A internal MOSFET; thus it can drive single or parallel LED strings for small to large size panel backlighting. And it is quite suitable for smart phone image capture using display device as a flash mode light source, as it can output up to 200mA current at 30V for 320ms when the strobe signal is active.The backlight mode default white LED current is set with the external sensor resistor, RSET, and the feedback voltage is regulated to 200mV, as shown in the typical application. During the operation, the LED current can be controlled by a pulse width modulation (PWM) signal applied to the CTRL pin, through which the duty cycle determines the feedback reference voltage. The CXLE8195 does not burst the LED current; therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open LED protection that disables the CXLE8195 to prevent the output voltage from exceeding the IC absolute maximum voltage ratings during open LED conditions.When the device is working, if the STROBE pin is pulled up, it will turn on flash mode within 100μs. And the feedback voltage is regulated to 5× of the backlight mode that determined by the PWM signal duty cycle. And it will turn to backlight mode within 100μs when the STROBE pin is pulled down or the strobe signal keeps high over the 320ms timer.The CXLE8195 is available in Green TDFN-2×2-6L package. It operates over an ambient temperature range of -40℃ to +85℃.

   产品特点 返回TOPpgs嘉泰姆

• Input Voltage Range: 2.7V to 5.5Vpgs嘉泰姆

• Integrated 3A/40V MOSFETpgs嘉泰姆

• Output Voltage Up to 38V (OVP)pgs嘉泰姆

• Output Current Up to 200mA @ 30Vpgs嘉泰姆

• Accumulated 320ms Flash Timer Controlpgs嘉泰姆

• 1.2MHz Switching Frequencypgs嘉泰姆

• PWM Dimming Control Interfacespgs嘉泰姆

• PWM Frequency: 20kHz ~ 100kHzpgs嘉泰姆

• Strobe Interface for Image Capture Modepgs嘉泰姆

• Up to 87% Efficiency for 7S2P LEDspgs嘉泰姆

• Up to 92% Efficiency for 3S20P LEDspgs嘉泰姆

• Dimming Stable in 1:500 Rangepgs嘉泰姆

• 200mV Feedback Voltage in Backlight Modepgs嘉泰姆

• 1000mV Feedback Voltage in Flash Modepgs嘉泰姆

• Built-In Soft-Start Functionpgs嘉泰姆

• Over-Voltage Protectionpgs嘉泰姆

• Built-In WLED Open/Short Protectionpgs嘉泰姆

• PFM Mode at Light Loadpgs嘉泰姆

• Thermal Shutdownpgs嘉泰姆

• -40℃ to +85℃ Operating Temperature Rangepgs嘉泰姆

• Available in Green TDFN-2×2-6L Packagepgs嘉泰姆

   应用范围 返回TOPpgs嘉泰姆

Smart phonespgs嘉泰姆

PDAs, Handheld Computerspgs嘉泰姆

Backlight for Small and Medium Form-Factor LCD Display with Single-Cell Battery Inputpgs嘉泰姆

   技术规格书（产品PDF) 返回TOP pgs嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！pgs嘉泰姆

 pgs嘉泰姆

产品封装图 返回TOPpgs嘉泰姆

pgs嘉泰姆

电路原理图 返回TOPpgs嘉泰姆

apgs嘉泰姆

相关芯片选择指南 返回TOP                         更多同类产品......

◀ Previous:Various protection features are built into the CXLE8194, including cycle-by-cycle input current limit protection, open LED (output over-voltage) protection and thermal shutdown protection. The leakage

Back to top

Next▶:High Efficiency, Constant Current 20V WhiteLEDs Driver CXLE8198 step-up converter drives white LEDs with a constant current to provide backlight in cell phones, PDAs, and other hand-held devices