Product information query
Products News
首页 > Products > Power Management > Synchronization or Asynchronous DC Converter > Synchronization DC Step-Up Converter >CXSU63277 13V 12A Fully Integrated Synchronous Boost Converter with Output Shutdown High Power Fully Integrated Boost Converter Supports Programmable Soft Start with 2.7V to 13V Wide Input Voltage Range Support for Applications with Single or Two Lithium
CXSU63277 13V 12A Fully Integrated Synchronous Boost Converter with Output Shutdown High Power Fully Integrated Boost Converter Supports Programmable Soft Start with 2.7V to 13V Wide Input Voltage Range Support for Applications with Single or Two Lithium

The CXSU63277 is a high-power, fully-integrated boost converter with a gate drive with load shutdown, an integrated 16mΩ power switch and 23mΩ synchronous rectifier, providing an efficient and small solution for portable systems. The CXSU63277 has a wide input voltage range of 2.7V to 13V to support applications with single or two-cell lithium batteries. The device has a 12A switching current capability and can provide an output voltage of 13V. CXSU63277 adaptive constant off-time peak current control topology is used to regulate the output voltage. Under moderate to heavy load conditions, the CXSU63277 operates in PWM mode. Under light load conditions, the device can select one of two modes of operation via the MODE pin. One is a PFM mode that can improve efficiency; the other is a forced PWM mode that can avoid application problems caused by low switching frequency. In PWM mode, the switching frequency of the CXSU63277 can be adjusted by an external resistor, supporting a range of 200kHz to 1.4MHz. The CXSU63277 also supports programmable soft-start and adjustable switching peak current limit. In addition, CXSU63277 the gate drive integrated with the output shutdown function, the input power can be completely disconnected in the SD state. In addition, the device provides 14V output overvoltage protection, cycle-by-cycle overcurrent protection and thermal shutdown protection.

CXSU63277 13V 12A Fully Integrated Synchronous Boost Converter with Output Shutdown High Power Fully Integrated Boost Converter Supports Programmable Soft Start with 2.7V to 13V Wide Input Voltage Range Support for Applications with Single or Two Lithium
Manual
Ordering

Ordering

Product introduction

Directory

  1. 1.Product overview       2.Product Features     Kvn嘉泰姆

  2. 3.Scope of application       4.Technical Specification Download(PDF Document)Kvn嘉泰姆

  3. 5.Product packaging       6.Circuit schematic  Kvn嘉泰姆
    7.Related ProductsKvn嘉泰姆

Product overview

Return to Top


The CXSU63277 is a high-power, fully-integrated boost converter with a gate drive with load shutdown, an integrated 16mΩ power switch and 23mΩ synchronous rectifier, providing an efficient and small solution for portable systems. The CXSU63277 has a wide input voltage range of 2.7V to 13V to support applications with single or two-cell lithium batteries. The device has a 12A switching current capability and can provide an output voltage of 13V. CXSU63277 adaptive constant off-time peak current control topology is used to regulate the output voltage. Under moderate to heavy load conditions, the CXSU63277 operates in PWM mode. Under light load conditions, the device can select one of two modes of operation via the MODE pin. One is a PFM mode that can improve efficiency; the other is a forced PWM mode that can avoid application problems caused by low switching frequency. In PWM mode, the switching frequency of the CXSU63277 can be adjusted by an external resistor, supporting a range of 200kHz to 1.4MHz. The CXSU63277 also supports programmable soft-start and adjustable switching peak current limit. In addition, CXSU63277 the gate drive integrated with the output shutdown function, the input power can be completely disconnected in the SD state. In addition, the device provides 14V output overvoltage protection, cycle-by-cycle overcurrent protection and thermal shutdown protection.

   Product FeaturesReturn to TopKvn嘉泰姆


・Input voltage range VIN:2.7V-13VKvn嘉泰姆

・Output voltage range VOUT:4.5V-13VKvn嘉泰姆
Programmable Peak Current: 12AKvn嘉泰姆
High conversion efficiency:Kvn嘉泰姆

93% (VIN = 7.4V, VOUT = 12V, IOUT = 3A)Kvn嘉泰姆
92% (VIN = 3.6V, VOUT = 9V, IOUT = 1A)Kvn嘉泰姆

Two modulation methods under light load conditions: pulse frequency modulation (PFM) and forced pulse width debugging (PWM)Kvn嘉泰姆
・Gate drive with integrated output shutdownKvn嘉泰姆
・Low turn-off power consumption, turn-off current 1uAKvn嘉泰姆
Adjustable switching frequency: 200k-1.4MKvn嘉泰姆
Programmable Soft StartKvn嘉泰姆
・Protection for output overvoltage (14V), cycle-by-cycle overcurrent, thermal shutdown, etc.Kvn嘉泰姆
・DFN20L,4.5mm * 3.5mm lead-free slim packageKvn嘉泰姆

   Scope of applicationReturn to TopKvn嘉泰姆


The wireless speaker.Kvn嘉泰姆

The portable speaker.Kvn嘉泰姆
Fast charge mobile power supplyKvn嘉泰姆
Electronic cigarettes.Kvn嘉泰姆
USB TYPE-C power transferKvn嘉泰姆
Pull rod speakerKvn嘉泰姆
Tablets, LaptopsKvn嘉泰姆
・ POS machine endKvn嘉泰姆

   Technical Specification (Product PDF)Return to Top Kvn嘉泰姆


If you need detailed PDF specifications, please scan WeChat and contact us. You can also get free samples and technical support.!Kvn嘉泰姆
        
QQ截图20160419174301.jpgKvn嘉泰姆
   Product packaging diagramReturn to TopKvn嘉泰姆


   Kvn嘉泰姆

   Circuit schematicReturn to TopKvn嘉泰姆


Kvn嘉泰姆

  Related Chip Selection GuideReturn to Top                 More related products.....Kvn嘉泰姆


synchronous boost converter
Product Model Modulation mode Input voltage Output voltage Output current Quiescent current Efficiency Frequency Encapsulation form
CXSU63275 PFM PWM 2.7V-20V 4.5V-20V 14A 1uA 95% 200k-1.4M DFN20L
CXSU63276 PFM PWM 2.7V-20V 4.5V-20V 14A 1uA 95% 200k-1.4M DFN20L
CXSU63277 PFM PWM 2.7V-12.2V 4.5V-12.8V 12A 1uA 92%  200k-1.4M DFN20L
CXSU63278 PFM 2.7V-13V 4.5V-13V 10A 1uA 93% 200k-1.4M SOP8-PP
                 
asynchronous boost converter
Product Model Modulation mode Input voltage Output voltage Output current Quiescent current Efficiency Frequency Encapsulation form
CXSU63279 PWM 2.5V-8.5V VIN-9V 10A 1uA 88% 600kHz SOP8L-PP