Cxld6487 series is a low-voltage differential, high-precision output voltage, low consumption current positive voltage voltage regulator developed by CMOS technology. Because of the built-in low-pass resistance transistor, the differential pressure is low and the output current can be larger. In order to make the load current not exceed the current capacity of the output transistor, overload current protection circuit and short circuit protection circuit are built in. In addition, due to the use of small packages such as sot-23-3 and sot89-3, it can be installed with high density

-
"
目录
7.相关产品
产品概述 返回TOP
CXLD6487系列是使用 CMOS 技术开发的低压差,高精度 输出电压,低消耗电流正电压型电压稳压器。由于内置有低 通态电阻晶体管,因而压差低,能够获得较大的输出电流。 为了使负载电流不超过输出晶体管的电流容量,内置了过载 电流保护电路、短路保护电路。 此外,因采用 SOT-23-3,SOT89-3 等小型封装,故可 高密度安装。
产品特点 返回TOP
可选择输出电压:可以在 1.2~6.0V 的范围内选择,并 以 0.1 V 为单位进级
输出电压精度高:精度可达±2.0%
输入输出压差低: 典型值 160 mV (输出为 3.0V 的产 品, IOUT=100mA 时)
消耗电流少:典型值 8.0μA
输出电流大:可输出 300mA(VIN≥VOUT+1V)
内置保护:内置过流保护和负载短路保护电路
最大工作电压:7V
采用小型封装:SOT-89-3 ,SOT-23-3 以及客户要求 的封装
应用范围 返回TOP
移动电话
无绳电话
相机、摄像机
手持游戏机
手持式 AV 设备
基准电压源
电池供电设备
技术规格书(产品PDF) 返回TOP需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP
产品名称 |
工作电压(V) |
输出电流(mA) |
静态功耗(uA) |
纹波抑制比(dB) |
封装形式 |
2.0-7.0 |
300 |
120 |
70@1KHz |
SOT-23-6 |
|
2.0-7.0 |
300 |
120 |
70@1KHz |
SOT-23-6 |
|
1.8-7.0 |
300 |
8 |
50@1KHz |
SOT-89-3,SOT-23-3 |