The CXSU63177 devices provide a power supply solution for products powered by either a one-cell Li-Ion or Li-polymer, or a two to three-cell alkaline, NiCd or NiMH battery. The converter generates a stable output voltage that is adjusted by an external resistor divider or fixed internally on the chip. It provides high efficient power conversion and is capable of delivering output currents up to 1 A at 5 V at a supply voltage down to 1.8 V. The implemented boost converter is based on a fixed frequency, pulse-width- modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency. At low load currents the converter enters Power Save mode to maintain a high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. It can also operate synchronized to an external clock signal that is applied to the SYNC pin. the maximum peak current in the boost switch is limited to a value of 5000 mA. The converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. A low-EMI mode is implemented to reduce ringing and, in effect, lower radiated electromagnetic energy when the converter enters the discontinuous conduction mode. The device is packaged in a 16-pin QFN package measuring 4 mm x 4 mm (RSA) or in a 16-pin TSSOP16.or in a DFN3x3-12 packages
-
"
目录
7.相关产品
产品概述 返回TOP
The CXSU63177 devices provide a power supply solution for products powered by either a one-cell Li-Ion or Li-polymer, or a two to three-cell alkaline, NiCd or NiMH battery. The converter generates a stable output voltage that is adjusted by an external resistor divider or fixed internally on the chip. It provides high efficient power conversion and is capable of delivering output currents up to 1 A at 5 V at a supply voltage down to 1.8 V. The implemented boost converter is based on a fixed frequency, pulse-width- modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency. At low load currents the converter enters Power Save mode to maintain a high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. It can also operate synchronized to an external clock signal that is applied to the SYNC pin. the maximum peak current in the boost switch is limited to a value of 5000 mA. The converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. A low-EMI mode is implemented to reduce ringing and, in effect, lower radiated electromagnetic energy when the converter enters the discontinuous conduction mode. The device is packaged in a 16-pin QFN package measuring 4 mm x 4 mm (RSA) or in a 16-pin TSSOP16.or in a DFN3x3-12 packages
产品特点 返回TOP
92% Efficient Synchronous Boost Converter With 1000-mA Output Current From 1.8-V Input
Device Quiescent Current: 20-μA (Typ)
Input Voltage Range: 1.8-V to 5.5-V
Adjustable Output Voltage Options Up to 5.5-V
Power Save Mode for Improved Efficiency at Low Output Power
Low Battery Comparator
Low EMI-Converter (Integrated Antiringing Switch)
Load Disconnect During Shutdown
Over-Temperature Protection
Available in a Small 4 mm x 4 mm QFN-16 or in a TSSOP-16 or in a DFN3*3-12 package
应用范围 返回TOP
Power Bank
Tablet
Portable Equiment
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
| Step-up Converter | ||||||
| Part No. | Input Voltage | Output Voltage | Current MAX | Frequency | Efficiency | Package |
| CXSU63168 | 6V | 20V | 350mA | 1.25MHz | 90% | SOT23-6 |
| CXSU63169 | 6V | 20V/28V/35V | 1A | 1MHz | 90% | SOT23-6 |
| CXSU63170 | 6V | 24V | 2A | 1.5MHz | 90% | SOT23-6 |
| CXSU63171 | 6V | 6V | 2A | 1MHz | 90% | SOT23-6 |
| CXSU63172 | 6V | 20V | 2A | 1.5MHz | 88% | SOT23-5 |
| CXSU63173 | 6V | 20V | 2A | 1.5MHz | 88% | SOT23-6 |
| CXSU63174 | 20V | 30V | 3.5A | 1.2MHz | 95% | DFN-10 |
| CXSU63175 | 6V | --V | --A | 1MHz | 90% | SOP-8/TSSOP-8 |
| CXSU63176 | 6V | 6V | 2A | 1MHz | 95% | SOT23-6 |
| CXSU63177 | 5V | 5V | 2.1A | 1.2MHz | 92% | /DFN-12/QFN-16QFN-16 |
| CXSU63178 | 5V | 5V | 2.1A | 1.2MHz | 92% | ESOP-8 |
| CXSU63179 | 5V | 5V | 6A | 1.2MHz | 92% | ESOP-8 |
