Product information query
Products News
首页 > Products > Power Management > DC/DC Step-Up Converter > DC Step-Up Converter >The cxsu6358 is a synchronous boost chip, which is mainly used in battery powered portable devices. The power MOS is integrated inside, and the external application circuit is very simple.
The cxsu6358 is a synchronous boost chip, which is mainly used in battery powered portable devices. The power MOS is integrated inside, and the external application circuit is very simple.

The cxsu6358 is a synchronous boost chip, which is mainly used in battery powered portable devices. The power MOS is integrated inside, and the external application circuit is very simple.
Cxsu6358 has built-in output short-circuit protection. After the output short-circuit, the IC will cut off the battery and output, wait for 120ms, and then re detect the output state. If the output short-circuit state is removed, the chip will automatically return to normal operation, if the short-circuit state is still
If yes, it will be detected every 120ms until the output short circuit state is removed.
The cxsu6358 is PWM working mode, working frequency is 550kHz, and the maximum output current is 2.1a at 5V output. When the output is light load, the cxsu6358 works in burping mode to reduce battery loss.

The cxsu6358 is a synchronous boost chip, which is mainly used in battery powered portable devices. The power MOS is integrated inside, and the external application circuit is very simple.
Manual
  • "

Ordering

Ordering

Product introduction

目录hnS嘉泰姆

1.产品概述       2.产品特点     3.应用范围      4.技术规格书下载(产品PDF文档) hnS嘉泰姆
5.产品封装图   6.电路原理图  7.功能概述      8.
相关产品hnS嘉泰姆

一,产品概述(General Description)      hnS嘉泰姆
直线hnS嘉泰姆
   CXSU6358 是一款同步升压芯片,主要应用于电池供电的便携式设备,内部集成了功率hnS嘉泰姆
MOS,外部应用电路非常简单。hnS嘉泰姆
   CXSU6358 内置输出短路保护,输出短路后 IC 将电池与输出切断,等待 120mS 后重hnS嘉泰姆
新侦测输出状态,如果输出短路状态解除,则芯片自动回复正常工作,如果短路状态仍然hnS嘉泰姆
存在,则会每隔 120mS 检测一次直到输出短路状态解除。hnS嘉泰姆
   CXSU6358 为 PWM 工作模式,工作频率为 550KHz,5V 输出时最大输出电流为 2.1A,hnS嘉泰姆
当输出轻载时 JTMT 5188 工作在打嗝模式以减小电池损耗。hnS嘉泰姆
二.产品特点(Features)hnS嘉泰姆
直线hnS嘉泰姆
放电电流:最大 2.1A(VOUT=5V)hnS嘉泰姆
输入电压:2.8V~5VhnS嘉泰姆
效率 91% (输入 3.7V,输出 5V/2A)hnS嘉泰姆
同步整流,无需整流二极管hnS嘉泰姆
集成输出短路保护hnS嘉泰姆
集成输出重载保护hnS嘉泰姆
集成过温保护hnS嘉泰姆
EN=0 时待机电流小于 1uAhnS嘉泰姆
封装形式:ESOP8hnS嘉泰姆
三,应用范围 (Applications)hnS嘉泰姆
直线hnS嘉泰姆
· 移动电源hnS嘉泰姆
· USB 充电应用hnS嘉泰姆
· 便携式设备电源hnS嘉泰姆
四.技术规格书下载(产品PDF)hnS嘉泰姆
直线hnS嘉泰姆

需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持hnS嘉泰姆

 QQ截图20160419174301.jpghnS嘉泰姆

五,产品封装图 (Package)hnS嘉泰姆
直线hnS嘉泰姆
 hnS嘉泰姆

管脚号hnS嘉泰姆

管脚名称hnS嘉泰姆

描述hnS嘉泰姆

1hnS嘉泰姆

SWhnS嘉泰姆

升压与整流端hnS嘉泰姆

2hnS嘉泰姆

SWhnS嘉泰姆

升压与整流端hnS嘉泰姆

3hnS嘉泰姆

BAThnS嘉泰姆

电池正极hnS嘉泰姆

4hnS嘉泰姆

ENhnS嘉泰姆

使能控制端,默认为低电平,工作需接高电平hnS嘉泰姆

5hnS嘉泰姆

GNDhnS嘉泰姆

模拟地hnS嘉泰姆

6hnS嘉泰姆

FBhnS嘉泰姆

输出电压设定端hnS嘉泰姆

7hnS嘉泰姆

VOUThnS嘉泰姆

输出电压正极hnS嘉泰姆

8hnS嘉泰姆

VOUThnS嘉泰姆

输出电压正极hnS嘉泰姆

ExposedhnS嘉泰姆
PADhnS嘉泰姆

PGNDhnS嘉泰姆

功率地,此散热片须与 PCB 有良好焊接hnS嘉泰姆

六.电路原理图hnS嘉泰姆
直线hnS嘉泰姆
hnS嘉泰姆
七,功能概述hnS嘉泰姆
直线hnS嘉泰姆

参数hnS嘉泰姆

额定值hnS嘉泰姆

单位hnS嘉泰姆

PGND to GND 电压hnS嘉泰姆

-0.3~+0.3hnS嘉泰姆

VhnS嘉泰姆

其它引脚电压hnS嘉泰姆

-0.3~+7hnS嘉泰姆

VhnS嘉泰姆

放电电流hnS嘉泰姆

2.4hnS嘉泰姆

AhnS嘉泰姆

储存环境温度hnS嘉泰姆

-50~+150hnS嘉泰姆

hnS嘉泰姆

工作结温范围hnS嘉泰姆

-40~150hnS嘉泰姆

hnS嘉泰姆

HBMhnS嘉泰姆

2000hnS嘉泰姆

VhnS嘉泰姆

MMhnS嘉泰姆

200hnS嘉泰姆

VhnS嘉泰姆

八,相关芯片选择指南hnS嘉泰姆

电源管理类>升压转换hnS嘉泰姆

产品名称hnS嘉泰姆

工作模式hnS嘉泰姆

VIN(V)hnS嘉泰姆

VOUT(V)hnS嘉泰姆

IOUT(A)hnS嘉泰姆

转换效率hnS嘉泰姆

MOS内置hnS嘉泰姆

短路保护hnS嘉泰姆

封装形式hnS嘉泰姆

CXSU6357hnS嘉泰姆

同步hnS嘉泰姆

2.8~5hnS嘉泰姆

5hnS嘉泰姆

1.5hnS嘉泰姆

93%hnS嘉泰姆

hnS嘉泰姆

hnS嘉泰姆

ESOP8hnS嘉泰姆

CXSU6358hnS嘉泰姆

同步hnS嘉泰姆

2.8~5hnS嘉泰姆

5hnS嘉泰姆

2.1hnS嘉泰姆

93%hnS嘉泰姆

hnS嘉泰姆

hnS嘉泰姆

ESOP8hnS嘉泰姆