The CXSD6284/A is a 6-channel, frequency-settable, volt-age-mode, DC/DC control IC providing a complete power supply solution for high-performance portable digital cameras. The CXSD6284/A uses pulse-width-modulation
(PWM) and synchronous rectification for high efficiency step-up, step-down, up-down, and inverting converters with free input and output settings in 2 or 4-cell AA, 1-cell lithium-ion (Li+), and dual-battery designs. The CXSD6284/A incorporates error amplifiers, output short-circuit detection, under-voltage lockout, soft-start, and output switch control into a chip.
The CXSD6284/A improves performance, component count, and size compared to conventional multi-channel controllers.
The CXSD6284/A has a power-good indicator (PGOOD)that signals when CH1 output is within ?0% of the set voltage by monitoring IN1 pin.
-
"
目录
1.产品概述 2.产品特点
3.应用范围 4.下载产品资料PDF文档
5.产品封装图 6.电路原理图
7.功能概述 8.相关产品
一,产品概述(General Description)
The CXSD6284/A is a 6-channel, frequency-settable, volt-age-mode, DC/DC control IC providing a complete power supply solution for high-performance portable digital cameras. The CXSD6284/A uses pulse-width-modulation
(PWM) and synchronous rectification for high efficiency step-up, step-down, up-down, and inverting converters with free input and output settings in 2 or 4-cell AA, 1-cell lithium-ion (Li+), and dual-battery designs. The CXSD6284/A incorporates error amplifiers, output short-circuit detection, under-voltage lockout, soft-start, and output switch control into a chip.
The CXSD6284/A improves performance, component count, and size compared to conventional multi-channel controllers.
The CXSD6284/A has a power-good indicator (PGOOD)that signals when CH1 output is within ±10% of the set voltage by monitoring IN1 pin.
The CXSD6284/A is available in compact 48-pin plastic LQFP and TQFN packages.
二.产品特点(Features)
1.)Supports for Synchronous Rectification
(CH1, CH2, and CH5)
2.)Supports for Down or Up-Down Zeta Conversions
(CH1 and JTMA7095 CH2)
3.)Supports for Up, Flyback, or Up-Down SEPIC
4.)Conversions (JTMA7095A CH2, CH3, JTMA7095
CH4, CH5, and CH6)
5.)Supports for Inverting Conversion
(JTMA7095A CH4)
6.)Low Start-up Voltage : 1.4V (CH6)
7.)Power Supply Voltage Range
- CH1 to CH5 : 3.0V to 6.5V
- CH6 : 2.4V to 6.5V
8.)1% Reference Voltage Accuracy
9.)Wide Operating Frequency 100kHz to 1MHz
10.)Soft-Start Function (CH1 to 6)
11.)Power Good (PGOOD) Indicator for CH1
12.)Low Shutdown Current
13.)Output Short-Circuit Detections
14.)Lead Free and Green Devices Available
三,应用范围 (Applications)
Digital Camera
Camcorder
Hand-Held Instrument
四.下载产品资料PDF文档
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
五,产品封装图 (Package)
六.电路原理图
七,功能概述
General
The CXSD6284/A provides voltage-mode feedback con-trols for six DC/DC PWM converters
(CH1 to CH6). Each channel operates with an error amplifier, PWM comparator,short-circuit
comparator, ON/OFF control, and output driver. An internal temperature-compensated voltage
pro-vides reference voltages for each channel. An triangular-wave oscillator(CT) with a timing
resistor and capacitor generates triangular waves to each channel. A inverting amplifier(CH4)
cooperates with the error amplifier for an inverting converter (with negative output voltage) .
Reference Voltage
The CXSD6284 outputs a temperature- compensated ref-erence voltage(2.49V) at VREF pin.
It is regulated from the voltage at VCC pin and can source current of max.1mA to external loads.
It also supplies bias for the IC’s internal circuitry.
Triangular-wave Oscillator
The triangular-wave oscillator is designed to generates a triangular oscillation signal (CT) with amplitude
of 0.3V~0.8V at CT pin, providing signal to CH6. The oscilla-tor frequency is settable from 100kHz to 1MHz
and set by a timing resistor and a timing capacitor connected re-spectively from RT and CT pins to ground.
Additional two triangular oscillation signals (CT1 and CT2) are also in-ternally generated with amplitude of
1.1V~1.8V. The CT1 is in phase with the CT to the PWM comparators of CH2 and CH4; the CT2 is out of
phase with the CT to the PWM comparators of CH1, CH3, and CH5.
Error Amplifier
The error amplifier is designed with unit-gain-bandwidth of 1MHz and to satisfy wide application requirements. It works with enternal resistor-capacitor network for each converter’s feedback compensation. The loop gain can be set by connecting a feedback resistor and capacitor from the output pin(FB) to inverted input pin of the error amplifier for stable operations.
Inverting Amplifier (Inv Amp)
The inverting amplifier detects the inverting DC/DC con-verter output voltage (as a negative voltage) and outputs a control signal to the error amp.
八,相关产品 更多同类产品......
|
Switching Regulator > Buck Controller |
||||||||||
|
Part_No |
Package |
Archi tectu |
Phase |
No.of PWM Output |
Output Current (A) |
Input Voltage (V) |
Reference Voltage (V) |
Bias Voltage (V) |
Quiescent Current (uA) |
|
|
min |
max |
|||||||||
|
SOP-14 QSOP-16 QFN4x4-16 |
VM |
1 |
1 |
30 |
2.9 |
13.2 |
0.9 |
12 |
8000 |
|
|
SOP-8 |
VM |
1 |
1 |
20 |
2.9 |
13.2 |
0.8 |
12 |
5000 |
|
|
SOP-8 |
VM |
1 |
1 |
20 |
2.9 |
13.2 |
0.8 |
12 |
5000 |
|
|
QFN4x4-24 |
VM |
2 |
1 |
60 |
3.1 |
13.2 |
0.6 |
12 |
5000 |
|
|
SOP-8 |
VM |
1 |
1 |
20 |
2.2 |
13.2 |
0.8 |
5~12 |
2100 |
|
|
SOP-8 |
VM |
1 |
1 |
20 |
2.2 |
13.2 |
0.8 |
5~12 |
2100 |
|
|
SOP8|TSSOP8 |
VM |
1 |
1 |
5 |
5 |
13.2 |
1.25|0.8 |
5~12 |
3000 |
|
|
SOP-8 |
VM |
1 |
1 |
10 |
3.3 |
5.5 |
0.8 |
5 |
2100 |
|
|
SOP-14 |
VM |
1 |
1 |
10 |
5 |
13.2 |
0.8 |
12 |
2000 |
|
|
TSSOP-24 |QFN5x5-32 |
VM |
1 |
2 |
20 |
5 |
13.2 |
0.6 |
5~12 |
4000 |
|
|
SOP14 QSOP16 QFN-16 |
VM |
1 |
1 |
30 |
2.9 |
13.2 |
0.9 |
12 |
4000 |
|
|
SOP-14 |
VM |
1 |
1 |
30 |
2.2 |
13.2 |
0.6 |
12 |
5000 |
|
|
SOP-14 |
VM |
1 |
1 |
30 |
2.2 |
13.2 |
0.6 |
12 |
5000 |
|
|
SOP-14 |
VM |
1 |
1 |
25 |
2.2 |
13.2 |
0.8 |
12 |
5000 |
|
|
LQFP7x7 48 TQFN7x7-48 |
VM |
1 |
6 |
0.015 |
1.4 |
6.5 |
- |
5 |
1800 |
|
|
TSSOP-24P |
VM |
1 |
2 |
20 |
2.97 |
5.5 |
0.8 |
5~12 |
5000 |
|
|
SOP-14 |
VM |
1 |
1 |
10 |
5 |
13.2 |
0.8 |
12 |
3000 |
|
|
SOP-8-P|DIP-8 |
VM |
1 |
1 |
30 |
2.9 |
13.2 |
1.2 |
12 |
3000 |
|
|
SSOP28 QFN4x4-24 |
VM |
1 |
2 |
20 |
5 |
24 |
0.9 |
5 |
1200 |
|
|
SOP-20 |
VM |
1 |
2 |
20 |
2.2 |
13.2 |
0.6 |
5~12 |
4000 |
|
|
SOP8|DFN3x3-10 |
VM |
1 |
2 |
- |
- |
- |
||||
