CXSD61005 monolithic step-down switch mode converter with a built-in power MOSFET. It achieves 1.8A output current over a wide input supply range with excellent load and line regulation
-
"
目录
产品概述 返回TOP
The CXSD61005 is a monolithic step-down switch mode converter
with a built-in power MOSFET. It achieves 1.8A output current over a
wide input supply range with excellent load and line regulation.Current
mode operation provides fast transient response and eases loop stabilization.Fault condition protection includes cycle-by-cycle current
limit and over temperature protection.
The CXSD61005 requires a minimum number of available standard
external components.The CXSD61005 is available in SOT23-6, TSOT23-6,
MSOP-10 and SOP-8 (Exposed Pad) packages
产品特点 返回TOP
● 1.8A Output Current
● 180mΩ Internal Power MOSFET Switch
● Stable with Low ESR Output Ceramic Capacitors
● Up to 92% Efficiency
● Fixed 1.4MHz Frequency
● Current Mode Operation
● Over-Temperature Protection with Hiccup-Mode
● Cycle-by-Cycle Over Current Protection
● Wide 4.5V to 23V Operating Input Range
● Output Adjustable from 0.805V to 15V
● 10μA Shutdown Current
● Miniature Packages:
SOT-23-6, TSOT23-6, MSOP-10 and SOP-8 (Exposed Pad)
应用范围 返回TOP
● Battery Charger
● Pre-Regulator for Linear Regulator
● OLPC, Netbook
● Distributed Power System
● WLED Driver
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
| Pin Name | Pin Function |
| BS | Bootstrap. A 22nF capacitor is connected between SW and BS pins to drive the power switch’s gate above the supply voltage. |
| GND | Ground Pin. Connect this pin to exposed pad. |
| FB | Feedback. An external resistor divider from the output to GND, tapped to the FB pin sets the output voltage. |
| EN | On/Off Control Input. Pull EN above 1.2V and below 5V to turn the device on. |
| VIN | Power Supply Input. Drive 4.5V to 23V voltage to this pin to power on this chip. Connect a 10μF ceramic bypass capacitor between VIN and GND to eliminate noise. |
| SW | Switch Output. Connect this pin to the switch end of the inductor. |
| NC | No Connect. |
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
DC-DC降压IC |
|||||||
|
型号 |
输入耐压 |
输出电压 |
输出电流 |
反馈电压 |
工作频率 |
效率 |
静态工作电流 |
|
42V |
可调输出/带CC/cv模式 恒流模式保护 |
3.5A |
0.8V |
125K |
94% |
3mA |
|
|
42V |
可调输出/带CC/cv模式 恒流模式保护 |
3A |
0.8V |
125K |
94% |
3mA |
|
|
42V |
可调输出/带CC/cv模式 恒流模式保护 |
2.5A |
0.8V |
125K |
94% |
3mA |
|
|
40V |
可调输出/带CC/cv模式 |
3A |
0.8V |
225K |
92% |
2.84mA |
|
|
50V |
5V固定输出 |
3.2A |
150K |
87% |
4.7mA |
||
|
50V |
5V固定输出 |
2.4A |
150K |
89% |
4.7mA |
||
|
50V |
5V固定输出 |
2.1A |
150K |
90% |
4.7mA |
||
|
50V |
5V固定输出 |
1.8A |
150K |
90% |
4.7mA |
||
|
40V |
可调输出/带CC/CV模式带线损补偿 |
3A |
0.8V |
125K |
94% |
4mA |
|
|
40V |
5V固定输出 |
3.5A |
150K |
93% |
2mA |
||
|
45V |
可调输出/ |
2A |
1.23V |
150K |
93% |
2mA |
|
|
40V |
可调输出/带CC/CV模式 |
2A |
1.18V |
110K |
93% |
10mA |
|
|
42V |
可调输出 |
3A |
0.8V |
50-500K |
91% |
3mA |
|
|
40V |
可调输出/带CC/cv模式 |
3A |
1.25V |
180K |
89% |
2.1mA |
|
|
40V |
可调输出/带CC/cv模式 |
3.5A |
1.25V |
180K |
87% |
2.1mA |
|
|
45V |
可调输出/带CC模式 |
3A |
1.25V |
150K |
89% |
2.0mA |
|
|
45V |
可调输出/带CC模式 |
2A |
1.235V |
150K |
83% |
2.0mA |
|
|
4.75V-40V |
可调输出 |
0.8A |
0.8V |
550K |
90% |
10uA |
|
|
4.0-42V |
可调输出 |
1.5A |
0.8V |
650K |
91% |
600uA |
|
|
4.5-25V |
可调输出 |
1.8A |
0.8V |
1.4M |
92% |
1.8mA |
|
|
20V |
可调输出 |
3.5A |
1.2V |
400K |
89% |
700uA |
|
|
28V |
可调输出 |
3A |
1.22V |
380K |
89% |
3mA |
|
|
20V |
可调输出 |
3A |
0.8V |
380K |
88% |
3mA |
|
|
20V |
可调输出 |
2A |
0.8V |
380K |
89% |
2mA |
|
|
45V |
5.0V/可调输出/3.3/12V |
2A |
1.23V |
150K |
82% |
2mA |
|
|
45V |
5.0V/可调输出 |
3A |
1.23V |
380K |
73% |
2mA |
|
|
27V |
可调输出 |
2A |
1.22V |
420K |
95% |
1mA |
|
