CXAS42217是一种32位高速、1.8V CMOS逻辑兼容的2:1多路复用/解复用总线交换机。开关的低导通电阻允许输入连接到输出，而不增加传播延迟或产生额外的地面反弹噪声。
该装置可用于需要切换两条总线的应用中。CXAS42217可以用作32位多路复用器或解复用器。
两个I/O（EN，S）输入提供芯片启用和多路复用器选择控制。
CXAS42217设计用于在切换总线时防止总线B和总线C之间的通电。
•两个端口之间的11Ω开关连接
•通过交换机的最小传播延迟
•“T”型开关结构，减少串扰
加强和之间的隔离
未选择的B或C总线
•低静态电源电流
•与1.8V逻辑兼容的控制输入
-
[ CXAS42217 ]"
目录
7.相关产品
产品概述 返回TOP
The CXAS42217 is a 32-bit high speed, 1.8V CMOS logic compatible 2:1 multiplexer/demultiplexer bus switch. The low on-resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.
The device can be used in applications where two buses need to be switched. The CXAS42217 can be used as a 32-bit multiplexer or demultiplexer.
Two I/O (EN, S) inputs provide chip enable and multiplexer select control.
The CXAS42217 is designed to prevent through-current between bus B and bus C when switching buses.
The CXAS42217 is available in Green LQFP-14×14-100L package. It operates over an ambient temperature range of -40℃ to +85℃.
产品特点 返回TOP
• 11Ω Switch Connection between Two Ports
• Minimal Propagation Delay through the Switch
• “T” Type Switch Structure to Reduce Crosstalk
and Enhance Isolation between A and
Unselected B or C Bus
• Low Quiescent Supply Current
• Control Inputs Compatible with 1.8V Logic
• -40℃ to +85℃ Operating Temperature Range
• Available in Green LQFP-14×14-100L Package
应用范围 返回TOP
a
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
a
相关芯片选择指南 返回TOP 更多同类产品......
|
特殊开关系列 |
||||||||
|
Part Number |
Feature |
VCC (Min)V |
VCC (Max)V |
-3dB Bandwidth |
Interface |
RON (Ω) |
Crosstalk (-dB) |
Package |
|
12x9,Buffered |
3.1 |
5.5 |
84 |
I2C |
74 |
SSOP-28 TSSOP-28 |
||
|
8x6, Buffered |
3.1 |
5.5 |
88 |
I2C |
77 |
TSSOP-24 |
||
|
SIM I/F Swap |
1.8 |
5.5 |
400 |
I/O |
80 |
TQFN-3x3-20L |
||
|
4-2:2, Passive Swap |
1.8 |
5.5 |
400 |
I/O |
12 |
80 |
TQFN-3x3-20L |
|
|
Six Channels 1:2 Multiplexer |
2 |
5 |
450 |
I/O |
8.5 |
55 |
TSSOP-24 TQFN-4x4-24L |
|
|
16x4,Passive |
2.7 |
5.5 |
120 |
I2C |
30 |
110 |
TSSOP-28 TQFN-4x4-28L |
|
|
16x8 Passive |
2.7 |
5.5 |
120 |
I2C |
30 |
110 |
TQFN-5x5-32L LQFP-7x7-32L |
|
|
1:16, Multiplexer |
3.3 |
13.2 |
80 |
I/O |
24 |
70 |
TQFN-5x5-32L TSSOP-28 |
|
|
Dual 1:8, Multiplexer |
3.3 |
13.2 |
135 |
I/O |
24 |
70 |
TQFN-5x5-32L TSSOP-28 |
|
|
High Speed, 16x8, Passive, I2C Interface |
2.7 |
5.5 |
250 |
I2C |
30 |
110 |
LQFP-7x7-32L |
|
|
1:8, Multiplexer |
3.3 |
13.2 |
80 |
I/O |
24 |
70 |
TSSOP-16 |
|
|
16x8, Passive |
4.5 |
13.2 |
45 |
I/O |
40 |
47 |
LQFP-10x10-44L PLCC-44L |
|
|
High Speed, 16x8, Passive, Serial Digital Interface |
2.7 |
5.5 |
250 |
SPI |
28 |
55 |
LQFP-7x7-32L |
|
|
High Speed, 2:1 32-Bit Bus Multiplexer |
3.3 |
5 |
100 |
I/O |
11 |
60 |
LQFP-14x14-100L |
|
|
High Speed, 3-1:3Multiplexer |
2.5 |
5.5 |
350 |
I/O |
7 |
60 |
TQFN-3x3-20L TSSOP-20 |
|
|
High Speed, 2-1:3 Multiplexer |
2.7 |
4.3 |
380/400 |
I/O |
4/9 |
90 |
UTQFN-2.2x1.4-12L |
|
