CXMD3297 is a 4+2-channel H-Bridge motor drivers IC for the digital camera and so on. It has three full-swing/constant voltage drivers and one full-swing/constant current drivers. CXMD3297 can be operated in serial control mode or partial exterior control mode. When operating in partial exterior control mode, the mode of each CH is fixed by initial serial control setting. When operating in serial control mode, the mode of each driver can be setting by serial control.
-
[ CXMD3297 ]"
目录
7.相关产品
产品概述 返回TOP
CXMD3297 is a 4+2-channel H-Bridge motor drivers IC for the digital camera and so on. It has three full-swing/constant voltage drivers and one full-swing/constant current drivers. CXMD3297 can be operated in serial control mode or partial exterior control mode. When operating in partial exterior control mode, the mode of each CH is fixed by initial serial control setting. When operating in serial control mode, the mode of each driver can be setting by serial control.
产品特点 返回TOP
„ Built in 3 full-swing/constant voltage drivers switched by serial control with brake function.
„ Built in 1 constant current drivers for shutter or IRIS.
„ Low on-resistance (1.2Ω, sum of on-resistance of upside and bottom side).
„ Output current：Iout<=0.8A(max.) for each channel. „ Build-in thermal shutdown (TSD, 150°C).
„ CH1/2 corresponds to STM control of 2-2 phase or 1-2 phase.
„ Built in exclusive control mode: CH13/23 Æ the combination control mode of 5CH is set.
„ Built in exclusive control mode: CH3/4(for DCM) Æ the combination control mode of 6CH is set.
„ Power save mode corresponds by serial control setup.
„ PI (photo interrupter drive) 3 channel built-in.
„ Small 20TQFN (3×3mm) is adopted.
应用范围 返回TOP
„ Stepping motor driver/ DC motor driver for DSC
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
a
相关芯片选择指南 返回TOP 更多同类产品......
|
Motor Driver |
||||||||||
|
Part NO. |
VCC(V min. |
VC(V max. |
VM(V min. |
VM(V max. |
CH |
Build -in PI |
Exterior Control |
Serial Control |
Note |
Package |
|
2.9 |
6 |
2.9 |
5.5 |
6+1 |
3 |
Y CH5~6 |
Y |
CH12&CH34 :Micro Stepping, CH5~CH6: CC/CV/FS |
TQFN5X5-40 |
|
|
3 |
6 |
3 |
6 |
5+1 |
3 |
Y |
Y |
CH12:256-Step MicroStepping CH3~CH4: CV/FS,CH5:CC |
TQFN4X4-28 |
|
|
2.3 |
5 |
-- |
-- |
1 |
-- |
N |
I2C |
CC*1,High active, 10 bit DAC |
TDFN2X2-6 WLCSP2X3-6 |
|
|
2.5 |
5.5 |
-- |
-- |
1 |
-- |
Y |
N |
CC*1 |
SOT23-8 TDFN2X2-8 |
|
|
1.5 |
6 |
2.9 |
6 |
5+1 |
3 |
Y |
Y |
CH1~3:CV/FS,CH5:CC/FS,CH4:CC /CV/FS,CC mode weak excitation |
TQFN4X4-32 |
|
|
1.8 |
5.5 |
-- |
-- |
1 |
-- |
Y |
N |
FS*1 |
WDFN1.6X1.4-6 SOP8/SOP8(FD) |
|
|
2.5 |
6 |
2.9 |
6 |
6+1 |
3 |
Y |
Y |
CH1~4,CH5:CV/FS,CH6:CC/FS, Built-in CC mode weak excitation |
TQFN5X5-40 |
|
|
2.5 |
5.5 |
3 |
5.5 |
4+2 |
3 |
Y |
Y |
CH1~3:CV/FS,CH4:CC/FS CH5:CV/FS |
TQFN4X4-28 |
|
|
2.5 |
6 |
2.9 |
6 |
4+2 |
3 |
Y |
Y |
CH1~3:CV/FS,CH4-4A: CC/CV/FS,CH4-4B:CC/FS |
TQFN3X3-20 |
|
|
2.2 |
5 |
1.8 |
10.5 |
1 |
0 |
Y |
N |
FS*1 |
DIP8/SOP8 |
|
|
2.2 |
5 |
1.8 |
10.5 |
2 |
0 |
Y CH1~2 |
N |
FS*2,2-Channel H-bridge drivers |
DIP16/SOP16 |
|
|
2.5 |
5 |
2.9 |
5 |
4+2 |
1 |
Y |
Y |
CH1~3:CV/FS,CH4:CC/FS CH5:CV/FS |
TQFN3X3-20 |
|
|
3 |
3.6 |
3 |
6 |
5+1 |
3 |
Y |
Y |
CH12:Micro_stepping, CH3~4 :CV/FS,CH5:CC/FS |
TQFN4X4-32 |
|
|
2 |
5 |
2 |
10.5 |
1 |
0 |
Y |
N |
FS*1 |
SOP8(FD) DIP-8 |
|
|
3 |
5.5 |
3 |
5.5 |
8+1 |
2 |
Y |
I2C |
CH1~3&CH5~9:CV/FS, CH4:CC/CV/FS |
TQFN5X5-40 |
|
|
2.5 |
5 |
4 |
16 |
1 |
0 |
Y |
N |
HV FS*1 |
SOP8(FD) TSSOP14 |
|
|
2.5 |
6 |
2.9 |
6 |
5+1 |
3 |
Y |
Y |
CH1~3:CV/FS,CH5: CC/FS,CH4:CC/CV/FS |
TQFN4X4-32 |
|
|
2.5 |
6 |
2.9 |
6 |
5+1 |
2 |
Y |
Y |
CH1~3:CV/FS,CH5: CC/FS,CH4: CC/CV/FS with Chopper Control |
TQFN4X4-44 |
|
