CXLB74207 linear charge management module synchronous rectifier boost discharge management module LED indicator module

首页 > Products > Battery Charging Chip > Mobile Power Chip > 3 in 1 Mobile Power IC >CXLB74207 linear charge management module synchronous rectifier boost discharge management module LED indicator module

CXLB74207 is a single-chip solution IC designed for mobile power. It highly integrates the mobile power management chip of charging management module, LED power display module and synchronous boost discharge management module, which greatly simplifies the number of peripheral circuits and components. For mobile power applications of large-capacity single-core or multi-core parallel lithium batteries (lithium-ion or lithium polymer), providing the most simple and easy-to-use low-cost solution

Manual

[ CXLB74207 ]"

Ordering

Product introduction

Product overview

Return to Top

CXLB74207 is a single-chip solution IC designed for mobile power. It highly integrates the mobile power management chip of charging management module, LED power display module and synchronous boost discharge management module, which greatly simplifies the number of peripheral circuits and components. For mobile power applications of large-capacity single-core or multi-core parallel lithium batteries (lithium-ion or lithium polymer), it provides the most simple and easy-to-use low-cost solution. The CXLB74207 package used is SOP8.

Product FeaturesReturn to TopdjO嘉泰姆

Linear charging, synchronous boost discharge, built-in charging and discharging power MOSdjO嘉泰姆
The KEY key switch boosts the discharge module and automatically ends the discharge after the load is fulldjO嘉泰姆
0.7A charging current set inside the chipdjO嘉泰姆
Synchronous Boost Maximum Output Current 1AdjO嘉泰姆
Unique Boost Output Thermal Regulation TechnologydjO嘉泰姆
Trickle/constant current/constant voltage charging, and has a thermal adjustment function to maximize the charging rate without the danger of overheating. C/10 charging termination, automatic rechargingdjO嘉泰姆
Preset 4.2V charging voltage with an accuracy of ± 1%djO嘉泰姆
Over-current, short-circuit, over-voltage, over-temperature protection for discharge outputdjO嘉泰姆
2 LED power display, charge and discharge indication and abnormal indicationdjO嘉泰姆

Scope of applicationReturn to TopdjO嘉泰姆

Mobile phones, tablets, GPS, power tools and other mobile equipment backup powerdjO嘉泰姆

Technical Specification (Product PDF)Return to Top djO嘉泰姆

If you need detailed PDF specifications, please scan WeChat and contact us. You can also get free samples and technical support.!djO嘉泰姆

QQ截图20160419174301.jpg djO嘉泰姆

Product packaging diagramReturn to TopdjO嘉泰姆

djO嘉泰姆
Circuit schematicReturn to TopdjO嘉泰姆

djO嘉泰姆

Related Chip Selection GuideReturn to Top More similar products......djO嘉泰姆

TWS Bluetooth Headset Charging Stand IC
Model	Function	Charging operating voltage	Charging current	Detection accuracy	Boost current	StandbydjO嘉泰姆 Power consumption	Protection function	Encapsulation	Features
CXLB74205	Synchronous switch charging management module synchronous rectifier boost discharge management module power detection andLEDIndicating module	4.4-5.5V	0.3A	1%	1A	60uA	Output overcurrent/Overvoltage/Short Circuit Protection Input Overvoltage/overcharge/over-release/Over-current discharge protection Overall over-temperature protection	ESOP-8	3-4OneLEDThe lamp indicates the power level or1-2LEDIndicating status,LEDLighting function, with side charging and side placing function,6-8mAAutomatic load detection function, with button boot, adaptive charging current adjustment, matching all adapters, up to boost efficiency91%, charging efficiency up93%
CXLB74206	Synchronous switch charging management module synchronous rectifier boost discharge management module power detection andLEDIndicating module	4.4-5.5V	0.5A	1%	1A	60uA	Output overcurrent/Overvoltage/Short Circuit Protection Input Overvoltage/overcharge/over-release/Over-current discharge protection Overall over-temperature protection	ESOP-8	3-4OneLEDThe lamp indicates the power level or1-2LEDIndication status,BeltLEDLighting function, with side charging and side placing function,6-8mAAutomatic load detection function, with button boot, adaptive charging current adjustment, matching all adapters, up to boost efficiency91%, charging efficiency up93%
CXLB74207	Linear charge management module synchronous rectifier boost discharge management moduleLEDIndicating module	4.4-5.5V	0.7A	1%	1A	50uA	Discharge output with overcurrent/Overvoltage/Over-temperature/Short circuit protection	SOP-8	2OneLEDLamp indicates charge and discharge status;Button boot, load current is less20mAGo to sleep;Boost operating frequency1MHz, the highest efficiency91%,ESD 2KVOperating temperature range:-40℃To 85℃
CXLB74208	Linear charge management module synchronous rectifier boost discharge management moduleLEDIndicating module	4.4-5.5V	1A	1%	1A	100uA	Discharge output with overcurrent/Overvoltage/Over-temperature/Short circuit protection	ESOP-8	4LEDLamp indicates power and charge and discharge status;Boot with button,Belt20mAAutomatic detection of load current,When the load current is lower20mAMore16After seconds,The output voltage remains5.1V(but can not give the output current),LEDLight out,Remind the user that the charging of the external device has ended. Boost operating frequency1MHz,Efficiency up90%,BeltLEDLighting,ESD 2KVOperating temperature range:-40℃To 85℃
CXLB74210	Linear charge management module synchronous rectifier boost discharge management moduleLEDIndicating module	4.5-5.25VWithstand voltage7.0V	0.15A	1%	0.5A/	18uA	Load over-current input over-voltage output current limiting output short-circuit chip over-temperature protection	SOP-8	Boost efficiency up90%;Support side filling and side placing;Support2 LEDLamp charge and discharge indication and abnormality;With trickle/Constant current/Constant voltage three-stage charging; with button to turn on the boost;Long press to turn off the boost;After boost load;The indicator light is on8Extinguished after seconds;With automatic load identification function, automatically turn on the boost output after detecting the load; no-load detection turns off the boost function, and the judgment current is about5-15mAPower on the input power/Power down,Battery automatic boost power supply; boost working frequency1MHz,Support1.5uHInductance,Built-inMOS;Operating temperature range:-40℃To 85℃
CXLB74211	Linear charge management module synchronous rectifier boost discharge management moduleLEDIndicating module	4.4-5.5V	0.38A	1%	0.7A	60uA	Output Short Circuit Protection Heavy Duty Protection Input6VOver-voltage protection intelligent temperature adjustment function	SOP-8	2LEDThe lamp indicates the charging and discharging state, and the power path management with protection is built in, which supports charging and discharging at the same time. Automatic detection of load startup+Press the key to click the boot; automatic detection load shutdown+Press the key for a long time to shut down; the automatic shutdown current threshold is6.5mA; The headset is not in the warehouse. Ultra-low standby current only7uA; Boost working frequency1MHz, support1.5uHInductors, Built-inMOS；ESD(HBM)2KVOperating temperature range:-40℃To 85℃
CXLB74212	Linear charge management module synchronous rectifier boost discharge management moduleLEDPower detection and indication module	4.4-5.5V	0.38A	1%	0.8A	60uA	Output Short Circuit Protection Heavy Duty Protection Input6VOver-voltage protection intelligent temperature adjustment function	ESOP-8	4LEDThe lamp indicates the power and charge and discharge status, and has built-in power path management with protection, supporting charging and discharging at the same time. Automatically detect load startup+Press the key to click the boot; automatic detection load shutdown+Press the key for a long time to shut down; the automatic shutdown current threshold is6.5mA; The headset is not in the warehouse. Ultra-low standby current7uA; Boost working frequency1MHz, support1.5uHInductors, Built-inMOS；ESD(HBM)2KVOperating temperature range:-40℃To 85℃
CXLB74213	Linear charge management module synchronous rectifier boost discharge management moduleLEDIndicating module	4.4-5.5V	0.38A	3%	0.8A	50uA	Output Short Circuit Protection Heavy Duty Protection Input6VOver-voltage protection intelligent temperature adjustment function	SOP-8	2LEDLamp indicates charge and discharge status,Support Hall drive to realize cover opening and return connection:Open cap output high level,Cover Output Low,With enable end,If the enable is high, the boost is turned off.,When the enable is low, the boost is normally open.,Working current90uA,If the load current is less10mATurn off the indicator light.,Built-in power path management with protection,Support side filling and side placing;Boost operating frequency1MHz, support1.5uHInductors, Built-inMOS；ESD(HBM)2KVOperating temperature range:-40℃To 85℃
CXLB74214	Synchronous switch charging management module Synchronous rectifier boost discharge management moduleLEDPower detection and indication module	4.75-5.5V	0.32A	0.60%	1.0A	20uA	Output overcurrent/Overvoltage/Short Circuit Protection Input Overvoltage/overcharge/over-release/Over-current discharge protection Overall over-temperature protection	ESOP-8	1-4LEDThe lamp indicates the power and charge and discharge status, and the boost efficiency is up93%, charging efficiency up92%; Built-in power path management, support while charging; Support4.20V/4.35VBattery (2Selection of external resistance of foot: non-connected resistance is4.20Vbattery, connected47KTo the ground4.35Vbattery), full voltage4.22V/4.37V; Adaptive charging current adjustment, matching all adapters; support4/3/2/1ALEDPower display; with a button to start, double-click the button to shut down; with intelligent automatic identification of load start,5mASmall current automatically into standby; Boost working frequency500KHz; Built-inMOS, single inductor to realize charging and discharging;ESD 4KVOperating temperature range:0℃To 70℃
CXLB74215	Synchronous switch charging management module Synchronous rectifier boost discharge management moduleLEDPower detection and indication module	4.75-5.5V	0.3A	0.60%	0.3A	5uA	Output overcurrent/Overvoltage/Short Circuit Protection Input Overvoltage/overcharge/over-release/Over-current discharge protection Overall over-temperature protection	ESOP-8	1-4LEDThe lamp indicates the power and charge and discharge status, and the boost efficiency is up93%, charging efficiency up92%; Built-in power path management, support while charging; Support4.20V/4.35VBattery (2Selection of external resistance of foot: non-connected resistance is4.20Vbattery, connected47KTo the ground4.35Vbattery), full voltage4.22V/4.37V; Adaptive charging current adjustment, matching all adapters; support4/3/2/1ALEDPower display; with a key to boot, double-click the button to shut down;8Seconds automatically turn off the light, click to view the power; with intelligent automatic identification of load start, automatic detection of Bluetooth headset in and out,5mASmall current automatically into standby; Boost working frequency500KHz; Built-inMOS, single inductor to realize charging and discharging;ESD 4KVOperating temperature range:0℃To 70℃
CXLB74216	Synchronous switch charging management module Synchronous rectifier boost discharge management moduleLEDPower detection and indication module	4.75-5.5V	1.1A	0.60%	1.5A	20uA	Output overcurrent/Overvoltage/Short Circuit Protection Input Overvoltage/overcharge/over-release/Over-current discharge protection Overall over-temperature protection	ESOP-8	1-4LEDThe lamp indicates the power and charge and discharge status, and the boost efficiency is up93%, charging efficiency up92%; Built-in power path management, support while charging; Support4.20V/4.35VBattery (2Selection of external resistance of foot: non-connected resistance is4.20Vbattery, connected47KTo the ground4.35Vbattery), full voltage4.22V/4.37V; Adaptive charging current adjustment, matching all adapters; support4/3/2/1ALEDPower display; Turn on with key, double-click the key to turn off, and press the key to turn on for a long time./OffLEDlighting; built-inLEDLighting drive, no current limiting resistor; with intelligent automatic identification of load start, automatic detection of load insertion and pull out,5mASmall current automatically into standby; Boost working frequency500KHz; Built-inMOS, single inductor to realize charging and discharging;ESD 4KVOperating temperature range:0℃To 70℃
CXLB74217	Synchronous switch charging management module Synchronous rectifier boost discharge management moduleLEDPower detection and indication module	4.60V-5.5VWithstand voltage6.0V	0.42A	0.60%	0.8A	15uA-25uA	With temperature compensation/over-temperature protection/overcharge and overdischarge protection/With output overvoltage/Overloading/Short circuit protection	ESOP-8	2LEDLamp indicates charge and discharge status, boost/Charging efficiency up94%; Support charging and discharging; Full voltage4.2V, accuracy±1%; Adaptive charging current adjustment, matching all adapters; Support trickle charging and0VCharging; with a button to start, double-click the button to shut down; automatic switch machine, with intelligent automatic identification of load start,7.5mASmall current automatically into standby; Boost working frequency500KHz; Built-inMOS, single inductor to realize charging and discharging;ESD（HBM）3.5KVOperating temperature range:-20℃To 85℃
CXLB74218	Synchronous switch charging management module Synchronous rectifier boost discharge management moduleLEDPower detection and indication module	4.60V-5.5VWithstand voltage6.0V	0.42A	0.60%	0.8A	15uA-25uA	With temperature compensation/over-temperature protection/overcharge and overdischarge protection/With output overvoltage/Overloading/Short circuit protection	ESOP-8	4LEDThe lamp indicates the state of power and charge and discharge, and supports charging and discharging at the same time. Full voltage4.2V, accuracy±1%; Adaptive charging current adjustment, matching all adapters; Support trickle charging and0Vcharging; support4LEDPower display; with a button to start, double-click the button to shut down; automatic switch machine, with intelligent automatic identification of load start,7.5mASmall current automatically into standby; Boost working frequency500KHz; Built-inMOS, single inductor to realize charging and discharging;ESD（HBM）3.5KVOperating temperature range:-20℃To 85℃

◀ Previous:CXLB74206 synchronous switch charging management module synchronous rectification boost discharge management module power detection and LED indication module

Next▶:CXLB74208 linear charge management module synchronous rectifier boost discharge management module LED indicator module

Products

Power Management

Led Driver

Audio Amplifier IC

Motor Fan Driver

MCU Memory ADC Clock

Power Device

Isolation Chip

Battery Charging Chip

Technology

Product Schemes

Quality Promises

Directory

Product overview

Return to Top

Contact Us