The CXLB7386 is an integrated USB power switch with boost converter to meet USB 5V
power requirements from a 2V to 5V input supply. The features include a USB compliant
power output, output switch enable, thermal shutdown and current limit.The USB power
switch is an integrated 200mΩ power switch with current limiting protection at 1.4A.
The boost converter output is an auxiliary 3V to 5.5V output to power additional loads.
Its Load current can program by an external resistor from as low as 130mA to as high as
2000mA. It can operate in stable waveforms without external compensation.

-
[ CXLB7386 ]"
目录
7.相关产品
产品概述 返回TOP
The CXLB7386 is a complete constant-current/constant-
voltage linear charger for single cell lithium-ion batteries.
Its ThinSOT package and low external component count
make the CXLB7386 ideally suited for portable applications.
Furthermore, the CXLB7386 is specifically designed to
work within USB power specifications.
No external sense resistor is needed, and no blocking
diode is required due to the internal MOSFET architecture.
Thermal feedback regulates the charge current to limit the
die temperature during high power operation or high
ambient temperature. The charge voltage is fixed at 4.2V,
and the charge current can be programmed externally with
a single resistor. The CXLB7386 automatically terminates
the charge cycle when the charge current drops to 1/10th
the programmed value after the final float voltage is
reached.
When the input supply (wall adapter or USB supply) is
removed, the CXLB7386 automatically enters a low current
state, dropping the battery drain current to less than 2μA.
The CXLB7386 can be put into shutdown mode, reducing
the supply current to 25μA.
Other features include charge current monitor,
undervoltage lockout, automatic recharge and a status pin
to indicate charge termination and the presence of an input
voltage.
产品特点 返回TOP
Programmable Charge Current Up to 800mA
No MOSFET, Sense Resistor or Blocking Diode
Required
Complete Linear Charger in ThinSOT Package for
Single Cell Lithium-ion Batteries
Constant-Current/Constant-Voltage Operation with
Thermal Regulation to Maximize Charge Rate
Without Risk of Overheating
Charges Single Cell Li-Ion Batteries Directly from
USB Port
Preset 4.2V Charge Voltage with ± 1% Accuracy
Charge Current Monitor Output for Gas Gauging
Automatic Recharge
Charge Status Output Pin
C/10 Charge Termination
25μA Supply Current in Shutdown
2.9V Trickle Charge Threshold (CXLB7386)
Available Without Trickle Charge (CXLB7386X)
Soft-Start Limits Inrush Current
Available in TSOT-25, TDFN-6(3mm*3mm)
Package
RoHS Compliant and 100% Lead (Pb)-Free
应用范围 返回TOP
z Cellular Telephones/ PDAs/ MP3 Players
z Charging Docks and CradIes
z Bluetooth Applications
技术规格书(产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品.....
Standalone Linear Li-Ion Battery Charger With Thermal Regulation in ThinSOT |
|||||||
Part Number |
remark |
Packs |
Vin (V) |
Charge Current (A) |
Charge Termination |
Control Topology |
Temperature Monitoring |
XStandalone Linear Li-Ion Battery Charger With Thermal Regulation in ThinSOT |
1 Cells, Li-Ion |
4.35 ~ 6.5 |
800mA |
Minimum current |
Linear W/FET |
No |
|
Linear Li-Ion/Polymer Charger IC with Integrated FET and Charger Timer |
1 Cells, Li-Ion |
4.35 ~ 6 |
1 |
Minimum current & Safety timer |
Linear W/FET |
Yes |
|
Dual Source AC/USB Li-Ion/Polymer Charger IC for Portable Applications |
1 Cells, Li-Ion |
4.35 ~ 6 USB |
1 |
Minimum current & Safety timer |
Linear W/FET |
Yes |
|
Li-ion/Li Polymer Battery Charger |
1 Cells, Li-Ion |
4.3 ~ 6.5 |
2 |
Minimum current & Safety timer |
Linear W/FET |
Yes |
|
witch Mode Li-Ion/Polymer Battery Charger |
1/ 2 Cells, Li-Ion |
4.7~20 |
1~3 |
Minimum current & Safety timer |
Switching |
Yes |
|
Switch Mode Li-Ion/Polymer Battery Charger |
1/ 2 Cells, Li-Ion |
4.7~20 |
1~3 |
Minimum current & Safety timer |
Switching |
Yes |
|
Switch Mode Li-Ion/Polymer Battery Charger |
1 cells, Li-Ion |
4.7~20 |
1~3 |
Minimum current & Safety timer |
Switching |
Yes |