CXLB7261 is a switch type single lithium battery charging circuit with dynamic path management. The cxlb7261 can provide 2.5A charging current, which is especially suitable for mobile power supply, tablet computer and other devices equipped with large capacity lithium battery. The cxlb7261 integrates the high current synchronous step-down module, charging control module, dynamic path management, input current limiting automatic detection, and all kinds of functions and protection power required for lithium battery charging Circuit, such as trickle, constant current, constant voltage charging; battery over temperature protection; charging indication; charging current setting does not need expensive milliohm resistance; charging time is too long to close; IC short circuit protection and over temperature protection. The SYS and BATT dual port reverse cut off function of CXLB7261 also prevents the battery from reverse pouring when the input interface is short circuited. The cxlb7261 also provides battery removal detection

-
"
目录
产品概述 返回TOP
CXLB7261是一款带动态路径管理的开关型单节锂电池充电电路。CXLB7261可提供 2.5A 的充电电流,特别适 合移动电源、平板电脑等配备超大容量锂电池的设备。CXLB7261内部集成了大电流同步降压模块,充电 控制模块,动态路径管理,输入限流自动检测,以及所有锂电池充电所需要的各种功能和各种保护电 路,如涓流、恒流、恒压充电;电池过温保护;充电指示;充电电流设定无需昂贵的毫欧级电阻;充电时间过长关闭;IC短路保护和过温保护等。CXLB7261的SYS和BATT双端口反向截止功能,也防止了输入接口短路时电池的反向倒灌。CXLB7261还提供电池移除检测功能。 同时CXLB7261是世界上第一款在ESOP8中实现动态路径管理的开关型充电电路。
产品特点 返回TOP
动态路径管理 + 开关型充电
高达 95%的开关降压效率
高达 2.5A 的充电电流
输入限流自动检测,维持输入电压
电池移除检测
无需昂贵的毫欧级电阻设定充电电流
电池过温保护
开关频率 3MHz
ESOP8 封装
应用范围 返回TOP
移动电源
平板电脑、学习机
移动音箱、移动 3G 路由器
技术规格书(产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品.......
开关模式单节锂电充电IC |
||||||||
产品型号 |
输出电压 |
输入电压 |
最大充电电流 |
充电截止电压 |
精度 |
涓流电止电压 |
功耗 |
封装 |
4.19V |
4.5-6.5V |
2A |
4.19V |
±1% |
2.9V |
3mA |
ESOP-8 |
|
4.2V |
3.8-6.5V |
2.5A |
4.2V |
±1% |
2.9V |
190uA |
ESOP8 |
|
4.35V |
3.8-6.5V |
2.5A |
4.35V |
±1% |
2.9V |
190uA |
ESOP8 |
|
4.2V |
4.5-5.5V |
2.5A |
4.2V |
±1% |
2.9V |
70uA |
ESOP8 |
|
4.35V |
4.4-5.5V |
2.5A |
4.35V |
±1% |
2.5V |
70uA |
ESOP8 |
|
4.2V |
4.0-6.5V |
3.5A |
4.2V以上可调 |
±1% |
2.9V |
70uA |
ESOP-8 |
|
4.2V |
4.5-28V |
扩流4A |
4.2V以上可调 |
±1% |
2.9V |
1mA |
SSOP-10 |
|
4.2V |
4.83-28V |
扩流4A |
4.2V以上可调 |
±1% |
3.1V |
1mA |
SSOP-10 |
|
4.2V |
5.0-20V |
扩流3A |
4.2V |
±1% |
3.0V |
1mA |
MSOP-10 |
|
4.2V |
4.8V-20V |
3A |
4.2V |
±1% |
2.9V |
1.5mA |
SOP-8 |
|
4.2V |
4.35-6V |
2A |
4.2V |
±1% |
2.9V |
60uA |
DFN3*3-10 |
|
4.2V |
4.35-6V |
2A |
4.2V以上可调 |
±1% |
2.9V |
60uA |
DFN3*3-10 |
|
单节 |
最大20V |
扩流3A |
4.2V |
0.50% |
3.0V |
10mA |
MSOP-10 |