Product information query
Products News
首页 > Products > Power Management > Current limiting load switch > Current limiting load switch >Slope Control Current Limiting Control Overvoltage Reverse Blocking Protection Low Resistance Load Switch Cxps4261
Slope Control Current Limiting Control Overvoltage Reverse Blocking Protection Low Resistance Load Switch Cxps4261

CXPS4261 is a 68mΩ (typical) low resistance MOSFET switch with slope control function, designed to insert between power supply and load, to isolate and protect the circuit from abnormal voltage and current conditions. CXPS4261 has the slope opening control function, which can prevent the input voltage from being too high or the battery voltage from falling due to excessive inrush current. CXPS4261 also has a variety of other protection functions, such as output overvoltage protection, input undervoltage protection, overcurrent (with fault signs) protection, and overheating protection. CXPS4261 can operate in a wide input voltage range of 2.5V to 5.5V, and can block OUT pin voltage up to 28V in the off state. CE input is valid for high level, including resistance pull-down function.

Slope Control Current Limiting Control Overvoltage Reverse Blocking Protection Low Resistance Load Switch Cxps4261
Manual
Ordering

Ordering

Product introduction

Directory

  1. 1.Product Overview       2.Product Features     RpW嘉泰姆

  2. 3.Application Scope 4.Download Technical specifications(PDF document)RpW嘉泰姆

  3. 5.Product packaging 6.Circuit Schematic diagram  RpW嘉泰姆
    7.Related productsRpW嘉泰姆

Product Overview

Return to TOP


CXPS4261 is a 68mΩ (typical) low resistance MOSFET switch with slope control function, designed to insert between power supply and load, to isolate and protect the circuit from abnormal voltage and current conditions. CXPS4261 has the slope opening control function, which can prevent the input voltage from being too high or the battery voltage from falling due to excessive inrush current. CXPS4261 also has a variety of other protection functions, such as output overvoltage protection, input undervoltage protection, overcurrent (with fault signs) protection, and overheating protection. CXPS4261 can operate in a wide input voltage range of 2.5V to 5.5V, and can block OUT pin voltage up to 28V in the off state. CE input is valid for high level, including resistance pull-down function.

   Product FeaturesReturn to TOPRpW嘉泰姆


Wide input voltage range: 2.5V to 5.5VRpW嘉泰姆
Absolute VOUT rating is 28VRpW嘉泰姆
 adjustable current limit to 3.1ARpW嘉泰姆
Integrated MOSFETs with a resistance of 68 Mohm at 5V VIN and 1A IOUTRpW嘉泰姆
Output OVP 5.8VRpW嘉泰姆
Open-circuit drain overcurrent fault signRpW嘉泰姆
 integrated protectionRpW嘉泰姆

-------- Thermal shutdownRpW嘉泰姆
-------- Undervoltage lockout (UVLO)RpW嘉泰姆
-------- Soft startRpW嘉泰姆
-------- Reverse blocking from OUT to INRpW嘉泰姆

Temperature Range:-40°C to 85°CRpW嘉泰姆
Output with fast discharge functionRpW嘉泰姆

   Application ScopeReturn to TOPRpW嘉泰姆


 smartphones and tabletsRpW嘉泰姆
 Mobile Internet DevicesRpW嘉泰姆
Peripheral devicesRpW嘉泰姆
Storage devices, DSLR, and portable devicesRpW嘉泰姆
Hot Plug Application of PC CardRpW嘉泰姆

   Technical Specification (product PDF)Return to TOP RpW嘉泰姆


For detailed PDF specifications, please scan WeChat and contact us. You can also get free samples and technical support.!RpW嘉泰姆

      RpW嘉泰姆

   Product packaging diagramReturn to TOPRpW嘉泰姆


  RpW嘉泰姆

   Circuit Schematic diagramReturn to TOPRpW嘉泰姆


RpW嘉泰姆

  Relevant chip selection guideReturn to TOP       More similar products......RpW嘉泰姆


Product Name Operating voltage (V) Average current (uA) Output mode Output logic Induction direction Working hours (uS) Cycle (mS) B _op B _rp B _hys Remarks
CXHA3154 1.8-4.5 3 CMOS output H Z-axis 50 150 ± 28 ± 15 - Hall switch
CXHA3155 1.8-6.0 350 NMOS open-drain output L Z-axis 85 0.35 ± 15 ± 11 4 Hall switch
CXHA3156 2.0-4.5 5 CMOS output L Z-axis 50 50 35 18 - Hall switch
CXHA3157 2.0-4.5 5 CMOS output L Z-axis 50 50 35 18 - Hall switch
CXHA3158 2.0-4.5 5 CMOS output L Z-axis 50 50 35 18 - Hall switch
CXHA3159 1.8-4.5 5 CMOS output L Z-axis 75 50 60 45 - Hall switch
CXHA3160 1.8-4.5 5 CMOS output L Z-axis 50 50 60 45 - Hall switch
CXHA3161 2.0-4.5 5 CMOS output L Z-axis - 50 35 20 - Hall switch
CXHA3129 1.65-6.0 3 NMOS open-drain output L Z-axis 100 140 ± 30 ± 20 8 Hall switch
CXHA3128 2.0-6.0 3 NMOS open-drain output L Z-axis 100 140 ± 15 ± 11 4 Hall switch
Product Name Model Channel Configuration Operating voltage (V) -3dB bandwidth (MHz) On-resistance (Ω) Maximum Current (mA) Static current (uA) Switching Time (nS) Encapsulation form Remarks
CXAS4258 2 SPDT 1.8-5.5 300 5.5 50 <1 Ton<20,Toff<10 DFN3 * 3-10L - Analog switch
CXAS4259 1 SPDT 1.8-5.5 300 5.5 50 <1 Ton<20,Toff<10 SOT23-6L,SOT363 - Analog switch
CXAS4257 2 SPDT 1.8-5.5 30 0.5 300 0.01 Ton=16,Toff=15 MSOP-10L - Analog switch
Product Name Enable Operating voltage (V) Maximum Current (mA) Conduction resistance (MΩ) Static current (uA) Over-temperature protection Overcurrent protection Output overvoltage protection Output discharge Anti-reverse irrigation/short circuit protection Remarks
CXPS4260 EN 4.5-6.0 200 1500 80 YES YES NO YES YES/YES Load switch
CXPS4261 EN 2.2-6.0 3500 70 120 YES YES YES YES YES/YES Load switch
CXPS4259 EN 2.2-6.0 1100/1300 100 23 YES YES NO NO YES/YES Load switch
CXPS4258 EN 2.0-5.5 3500 70 40 YES YES NO NO YES/YES Load switch