Cxlb73113 is a perfect linear power management chip with constant current / voltage for single-chip lithium-ion battery. Its thin size and small outer package make it convenient for portable application. What's more, cxlb73113 is specially designed for USB power supply specifications. Due to the internal MOSFET structure, external resistors and blocking diodes are not needed in application. In high energy operation and high peripheral temperature, thermal feedback can control the charging current to reduce the chip temperature. The charging voltage is limited to 4.2V, and the charging current is regulated by external resistance. After reaching the target charging voltage, when the charging current drops to 1 / 10 of the set value, the cxlb73113 will automatically end the charging process. When the input terminal (plug or USB power supply) is unplugged, the cxlb73113 will automatically enter the low current state, and the battery leakage current will drop below 2 μ a. The cxlb73113 can also be set to stop working to reduce the power supply current to 25 μ a. Other features include: charging current monitoring, input low voltage lockout, automatic recharging, full charging and start charging signs
-
[ CXLB73113 ]"
目录
7.相关产品
产品概述 返回TOP
CXLB73113是一个完善的单片锂离子电池恒流/恒压线形电源管理芯片。它薄的尺寸和小的外包装使它便于便携应用。更值得一提的是，CXLB73113 专门设计适用于 USB 的供电规格。 得益于内部的 MOSFET 结构，在应用上不需要外部电阻和阻塞二极管。在高能量运行和高外围温度时，热反馈可以控制充电电流以降低芯片温度。充电电压被限定在 4.2V，充电电流通过外部电阻调节。在达到目标充电电压后，当充电电流降低到设定值的 1/10 时，CXLB73113 就会自动结束充电过程。 当输入端（插头或 USB 提供电源）拔掉后，CXLB73113 自动进入低电流状态，电池漏电流将降到 2μA以下。CXLB73113 还可被设置于停止工作状态，使电源供电电流降到 25μA。 其余特性包括：充电电流监测，输入低电压闭锁，自动重新充电和充电已满及开始充电的标志。
产品特点 返回TOP
可编程使充电电流可达800mA.
不需要 MOSFET，传感电阻和阻塞二极管
小的尺寸实现对锂离子电池的完全线形充电管理
恒电流/恒电压运行和热度调节使得电池管理效力最高，没有热度过高的危险
从 USB 接口管理单片锂离子电池
预设充电电压为 4.2V ±1%
充电电流输出监控
充电状态指示标志
1/10 充电电流终止
停止工作时提供 25μA 电流
2.9V 涓流充电阈值电压
软启动限制浪涌电流电流
采用 SOT23-5
应用范围 返回TOP
手机，PDA，MP3
蓝牙应用
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品。。。。。。
|
锂电充电IC |
|||||
|
型号 |
输入电压 |
输出电压 |
最大充电流 |
待机电流 |
封装 |
|
5V |
4.2V/4.34V |
1A |
55μA |
SOP-8 |
|
|
9~10V |
8.4 |
1000mA |
55μA |
DIP-8 |
|
|
9V |
4.2V |
600mA |
145uA |
SOT23-5 |
|
|
10V |
5V |
1.2A |
55μA |
SOP-8 |
|
|
5V |
4.2V |
600mA |
25uA |
SOT-23-5 |
|
|
4.75~7V |
4.2 v |
500MA |
55μA |
SOT-23-6L |
|
|
4.25~6 |
4.2 v |
800MA |
20uA |
SOT-23 and PSOP-8 |
|
|
9V |
4.2 v |
600mA |
145uA |
SOT-23-6L |
|
|
4.25~6.5 |
4.2V |
800mA |
25uA |
SOT-23-5 |
|
|
4.0~9.0 |
4.2V |
500mA |
40uA |
SOT-23-6L |
|
|
9V |
4.2V |
500mA |
40uA |
TSOT-23 |
|
|
4.2V~6.5V |
4.2V |
800mA |
45uA |
SOT23-5 |
|
|
9-10V |
8.4 |
1A |
25uA |
SOP-8L |
|
|
5.5 |
4.2V |
600mA |
25uA |
SOT-23 |
|
|
4.0~8.0 |
4.2V |
1A |
55uA |
SOP-8 |
|
|
4.5~6.5V |
4.2V |
800mA |
25μA |
SOT-23-5 |
|
|
3.6V |
12V |
800mA |
25μA |
SOT-23-6 |
|
|
8V-36V |
4.8A |
25μA |
SOP-8 |
||
|
5V~16V |
1.2V~16V |
2A |
25μA |
SOP-8 |
|
|
4.7v-6v |
4.2V |
2A |
4μA |
SOP-8 |
|
|
2.3V~5.5V |
1.5A |
1μA |
SOT23-5 |
||
