The CXLB7389 series are highly integrated single cell
Li-Ion/Polymer battery charger IC designed for handheld
devices. This charger is designed to work with various
types of AC adapters or a USB port and capable of
operating with an input voltage as low as 2.65V.
The CXLB7389 operates as a linear charger and charges the
battery in three phases: trickle current, constant current,
and constant voltage. When AC-adapter is applied, an
external resistor sets the magnitude of the charge current,
which may be programmed up to 1.5A with TDFN10
package and a current-limited adapter for lowest power
dissipation.
The CXLB7389 features thermal regulation loop to control
charge current to keep safe operation when PCB lacked of
enough heat-sinking. A programmable charge timer
provides a backup safety for termination. The CXLB7389
automatically re-starts the charge if the battery voltage
falls below an internal threshold and automatically enters
sleep mode when DC supplies are removed. No external
sense resistor or blocking diode is required for charging. A
NTC thermistor interface is used for charging the battery
in a safe temperature range.
-
[ CXLB7389 ]"
目录
7.相关产品
产品概述 返回TOP
The CXLB7389 series are highly integrated single cell
Li-Ion/Polymer battery charger IC designed for handheld
devices. This charger is designed to work with various
types of AC adapters or a USB port and capable of
operating with an input voltage as low as 2.65V.
The CXLB7389 operates as a linear charger and charges the
battery in three phases: trickle current, constant current,
and constant voltage. When AC-adapter is applied, an
external resistor sets the magnitude of the charge current,
which may be programmed up to 1.5A with TDFN10
package and a current-limited adapter for lowest power
dissipation.
The CXLB7389 features thermal regulation loop to control
charge current to keep safe operation when PCB lacked of
enough heat-sinking. A programmable charge timer
provides a backup safety for termination. The CXLB7389
automatically re-starts the charge if the battery voltage
falls below an internal threshold and automatically enters
sleep mode when DC supplies are removed. No external
sense resistor or blocking diode is required for charging. A
NTC thermistor interface is used for charging the battery
in a safe temperature range.
产品特点 返回TOP
Very Low Power Dissipation
Accepts Multiple Types of Adapters or USB BUS Power
Integrated Power FET and Current Sensor for Up
to 1.5A Charge Applications
Guaranteed to Operate at 2.65V After Start-Up
Charge Termination by Minimum Current and
Time
Precharge Conditioning With Safety Timer
Reverse Leakage Protection Prevents Battery
Drainage
Charge Current Thermal Regulation
Status Outputs for LED or System Interface
Indicates Charge and Fault Conditions
Optional Battery Temperature Monitoring Before
and During Charge
Automatic Sleep Mode for Low-Power
Consumption
Available in 3mm × 3mm TDFN-10 Package
RoHS Compliant and 100% Lead (Pb)-Free
应用范围 返回TOP
z PDAs, Cell Phones and Smart Phones
z Portable Instruments.
z Stand-Alone Charger.
z USB Bus Powered Charger
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品.....
|
Standalone Linear Li-Ion Battery Charger With Thermal Regulation in ThinSOT |
|||||||
|
Part Number |
remark |
Packs |
Vin (V) |
Charge Current (A) |
Charge Termination |
Control Topology |
Temperature Monitoring |
|
XStandalone Linear Li-Ion Battery Charger With Thermal Regulation in ThinSOT |
1 Cells, Li-Ion |
4.35 ~ 6.5 |
800mA |
Minimum current |
Linear W/FET |
No |
|
|
Linear Li-Ion/Polymer Charger IC with Integrated FET and Charger Timer |
1 Cells, Li-Ion |
4.35 ~ 6 |
1 |
Minimum current & Safety timer |
Linear W/FET |
Yes |
|
|
Dual Source AC/USB Li-Ion/Polymer Charger IC for Portable Applications |
1 Cells, Li-Ion |
4.35 ~ 6 USB |
1 |
Minimum current & Safety timer |
Linear W/FET |
Yes |
|
|
Li-ion/Li Polymer Battery Charger |
1 Cells, Li-Ion |
4.3 ~ 6.5 |
2 |
Minimum current & Safety timer |
Linear W/FET |
Yes |
|
|
witch Mode Li-Ion/Polymer Battery Charger |
1/2 Cells, Li-Ion |
4.7~20 |
1~3 |
Minimum current & Safety timer |
Switching |
Yes |
|
|
Switch Mode Li-Ion/Polymer Battery Charger |
1/2 Cells, Li-Ion |
4.7~20 |
1~3 |
Minimum current & Safety timer |
Switching |
Yes |
|
|
Switch Mode Li-Ion/Polymer Battery Charger |
1 cells, Li-Ion |
4.7~20 |
1~3 |
Minimum current & Safety timer |
Switching |
Yes |
|
