he CXLB7365 is a complete constant current & constant voltage linear charger for single cell lithium-ion batteries. Its SOP package and low external component count make the CXLB7365 ideally suited for portable applications.Furthermore, the CXLB7365 is specifically designed to work within USB power specifications.No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.35V, and the charge current can be programmed externally with a single resistor. The CXLB7365 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached.
When the input supply (wall adapter or USB supply) is removed, the CXLB7365 automatically enters a low current state, dropping the battery drain current to less than 2uA. The CXLB7365 can be put into shutdown mode, reducing the supply current to 50uA.Other features include Battery temperature monitor, under-voltage lockout, automatic recharge and two status pins to indicate charge and charge termination
-
"
目录
1.产品概述 2.产品特点 3.应用范围 4.技术规格书下载（PDF文档）
一.产品概述
The CXLB7365 is a complete constant current & constant voltage linear charger for single cell lithium-ion batteries. Its SOP package and low external component count make the CXLB7365 ideally suited for portable applications.Furthermore, the CXLB7365 is specifically designed to work within USB power specifications.No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.35V, and the charge current can be programmed externally with a single resistor. The CXLB7365 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached.
When the input supply (wall adapter or USB supply) is removed, the CXLB7365 automatically enters a low current state, dropping the battery drain current to less than 2uA. The CXLB7365 can be put into shutdown mode, reducing the supply current to 50uA.Other features include Battery temperature monitor, under-voltage lockout, automatic recharge and two status pins to indicate charge and charge termination.
二.产品特点
Programmable Charge Current Up to 1000mA
No MOSFET, Sense Resistor or Blocking Diode Required
Complete Linear Charger in SOP Package for
single Cell Lithium-Ion Batteries
Constant-Current/Constant-Voltage Operation
with Thermal Regulation to Maximize Charge
Rate Without Risk of Overheating
Charges Single Cell Li-Ion Batteries Directly from
USB Port
Preset 4.35V Charge Voltage with ±1% Accuracy
Charge Current Monitor Output for Gas Gauging
Automatic Recharge
Charge state pairs of output, no battery and fault
status display
C/10 Charge Termination
50uA Supply Current in Shutdown
2.9V Trickle Charge Threshold
Soft-Start Limits Inrush Current
Battery temperature monitoring function
ESD HBM 8KV
Available in SOP8-PP Package
三.应用范围
Cellular Telephones, PDAs, MP3 /MP4 Players
Charging Docks and Cradles
Bluetooth 、GPS Applications
四.技术规格书（产品PDF)
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
五.产品封装图
六.电路原理图
七.相关芯片选择指南 更多同类产品......
|
线性充电管理 |
|||||||||
|
PN |
Vin |
VBAT |
Icharge |
Cell |
Trickle |
Charge |
Charge |
Package |
Description |
|
V |
V |
(A) |
charge |
status |
Type |
||||
|
4.5~6 |
4.21 |
1 |
1 |
Yes |
Yes |
CC/CV |
SOP8-PP |
1A锂电池线性充电管理，带涓流充电和电芯温度检测 |
|
|
4.5~6 |
4.2 |
0.6 |
1 |
Yes |
Yes |
CC/CV |
SOT23-5 |
0.6A锂电池线性充电管理，带涓流充电 |
|
|
4.5~6 |
4.35 |
1 |
1 |
yes |
yes |
CC/CV |
SOP8-PP |
1A锂电池线性充电管理，带涓流充电和电芯温度检测 |
|
