The CXPR7145D product is a high integration solution for lithium-ion/polymer
battery protection.
CXPR7145D contains advanced power MOSFET, high-accuracy voltage
detection circuits and delay circuits.
CXPR7145D is put into an ultra-small DFN2X2-6 package and only one
external component makes it an ideal solution in limited space of battery pack.
CXPR7145D has all the protection functions required in the battery application
including overcharging, overdischarging, overcurrent and load short circuiting
rotection etc. The accurate overcharging detection voltage ensures safe and full
utilization charging.The low standby current drains little current from the cell while
in storage.The device is not only targeted for digital cellular phones, but also for
any other Li-Ion and Li-Poly battery-powered information appliances requiring
long-term battery life.
-
"
|
目录 1.产品概述 2.产品特点 一,产品概述(General Description) battery protection. detection circuits and delay circuits. CXPR7145D is put into an ultra-small DFN2X2-6 package and only one including overcharging, overdischarging, overcurrent and load short circuiting rotection etc. The accurate overcharging detection voltage ensures safe and full utilization charging.The low standby current drains little current from the cell while in storage.The device is not only targeted for digital cellular phones, but also for any other Li-Ion and Li-Poly battery-powered information appliances requiring long-term battery life. 二.产品特点(Features) |
|
NUMBER |
PIN NAME |
PIN DESCRIPTION |
|
1 |
VDD |
Power Supply |
|
2，3 |
GND |
Ground, connect the negative terminal of the battery to this pin |
|
4，5，6 |
VM |
The negative terminal of the battery pack. The internal FET switch |
|
7 |
EPAD |
Please connect EPAD with mass metal GND |
五,电路原理图
六.产品PDF文档
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
七,功能概述
The CXPR7145D monitors the voltage and current of a battery and protects it from being damaged due to overcharge voltage,overdischarge voltage, overdischarge current, and short circuit conditions by disconnecting the battery from the load or charger. These functions are required in order to operate the battery cell within specified limits.
The device requires only one external capacitor. The MOSFET is integrated and its RDS(ON) is as low as 45mΩ typical.
八,相关产品 更多同类产品......
|
小过放电流/二合一锂电保护IC |
|||||||||||
|
型号 |
耐压 |
工作 电流 |
过充 电压 |
过充释 放电流 |
过放 电压 |
过放释 放电压 |
过放 自恢复 |
过流 保护 |
短路 保护 |
封装 |
说明 |
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
SOT-25 |
||
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
SOT-25 |
cost down版本 |
|
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
SOT-23 |
cost down版本 |
|
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.9V |
3.0V |
OK |
OK/3A |
OK |
SOT-25 |
||
|
6.0V |
2.8uA |
4.425V |
4.25V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
SOT-25 |
4.35V锂电池保护应用 |
|
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
SOT-25 |
cost down版本 |
|
|
10.0V |
2.8uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/2.5A |
OK |
SOT-26 |
||
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.8V |
3.0V |
OK |
OK/0.9A |
OK |
SOT-25 |
小过放电流/保护应用 |
|
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.8V |
3.0V |
OK |
OK/0.9A |
OK |
DFN2*2-6 |
小过放电流/保护超薄应用 |
|
|
6.0V |
2.8uA |
4.425V |
4.25V |
2.8V |
3.0V |
OK |
OK/0.9A |
OK |
DFN2*2-6 |
4.35V电芯/小过放电流/保护超薄 |
|
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
DFN2*2-6 |
电子烟等超薄应用 |
|
|
6.0V |
2.8uA |
4.25V |
4.1V |
2.9V |
3.0V |
OK |
OK/3A |
OK |
DFN2*2-6 |
电子烟等超薄应用 |
|
|
6.0V |
3.9uA |
4.3V |
4.10V |
2.4V |
3.0V |
OK |
OK/9A |
OK |
DFN1.8*1.4 |
电子烟等 |
|
|
8.0V |
3uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
DFN-5L |
电子烟等超薄应用 |
|
|
8.0V |
3uA |
4.4V |
4.2V |
2.8V |
3.0V |
OK |
OK/4A |
OK |
DFN-5L |
4.35V电芯保护超薄应用 |
|
